Memmert IPP30 plus ペルチェ冷却インキュベーター

Temperature
Working temperature range     from 0°C to +70°C
Setting accuracy temperature     0.1°C
Temperature     2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
Control technology
ControlCOCKPIT     TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Language setting     German, English, Spanish, French, Polish, Czech, Hungarian
Timer     Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT     the process time does not start until the set temperature is reached
Calibration     three freely selectable temperature values
adjustable parameters     temperature (Celsius or Fahrenheit), programme time, time zones, summertime/wintertime
Ventilation
Convection     forced ventilation by Peltier fan
Communication
Documentation     programme stored in case of power failure
Programming     AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Safety
Temperature control     over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY     additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
Autodiagnostic system     for fault analysis
Alarm     visual and acoustic
Heating concept
Peltier     energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle)
Standard equipment
Internals     1 stainless steel grid(s), electropolished
Scope of delivery     incl. works calibration certificate for +10°C and +37°C
Door     fully insulated stainless steel door with 2-point locking (compression door lock)
Door     inner glass door
Stainless steel interior
Volume     32 l
Dimensions W x H x D in mm     w(A) x h(B) x d(C): 400 x 320 x 250 mm
Max. number of internals     3
Max. loading of chamber     60 kg
Max. loading per internal     20 kg
Textured stainless steel casing
Dimensions     w(D) x h(E) x d(F): 585 x 704 x 524 mm
Housing     rear zinc-plated steel
Electrical data
Voltage Electrical load     230 V, 50/60 Hz
approx. 140 W
Voltage Electrical load     115 V, 50/60 Hz
approx. 140 W
Packing/shipping data/Setting Up
Set Up     The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Transport information     The appliances must be transported upright
Customs tariff number     8419 8998
Country of origin     Federal Republic of Germany
WEEE-Reg.-No.     DE 66812464
Dimensions approx incl. carton     B x H x T: 660 x 890 x 650 mm
Net weight     approx. 40 kg
Gross weight carton     approx. 56 kg

datasheet