Netally AIRCHECK G2 ワイヤレステスター

General 

Dimensions: 3.8 in x 7.7 in x 1.6 in (9.7 cm x 19.6 cm x 4.1 cm)

Weight: 18 oz (0.51 kg)

Battery: Rechargeable lithium-ion battery pack (3.6 V, 6 Ah, 21 Wh)

Battery Life: Typical operating life is 4.5 hours. Typical charge time is 7 hours.

External AC Adapter/Charger: AC input 85-264V AC 47-63 Hz input power DC output 15 V DC at 2 Amps

Display: 5.0 in color LCD with capacitive touch screen (480 x 800 pixels)

Keypad: 1-key elastomeric (power only)

Host Interface: 1x micro USB Type B port

Adjunct Interface: 2x USB 2.0 Type A port

Wireless Antenna: 3x Internal

External Antenna Port: Receive only (no transmit). Reverse-polarity SMA connector.

Environmental 

Operating Temperature: 32°F to 113°F (0°C to +45°C)

 NOTE: The battery will not charge if the internal temperature of the tester is above 122°F (50°C).

Operating relative humidity (% RH without condensation):

• 90% (50°F to 95°F; 10°C to 35°C)

• 75% (95°F to 113°F; 35°C to 45°C)

Storage temperature: -4°F to 140°F (-20°C to +60°C)

Shock and vibration: 1 m drop test, Random, 3.8 grms, 5 Hz-500 Hz (Class 2)

Safety: IEC 61010-1: Pollution degree 2

Altitude: 4,000 m; Storage: 12,000 m

EMC: IEC 61326-1: Basic Electromagnetic Environment; CISPR 11: Group 1, Class A

Wireless 

Specification Compliance: IEEE 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, 802.11ax

Note: The tester provides 802.11ax visibility using an 802.11ac radio

Wi-Fi Connectivity: Frequencies of channels received:

NOTE: The tester receives on all of the frequencies in every country.2.4 GHz band: 2.412 – 2.484 GHz (channel 1 to channel 14)

5 GHz band: 5.170 – 5.320 GHz, 5.500 – 5.700 GHz, 5.745 – 5.825 GHz (channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165)

Operating Frequencies: Frequencies of channels transmitted:

NOTE: The tester transmits only on the frequencies allowed in the country where it is operating.NOTE: These are the center frequencies of the channels that the AirCheck G2 tester supports.2.4 GHz band: 802.11b: 2.412 – 2.484 GHz (channel 1 to channel 14)802.11g/n 20 MHz BW (HT20): 2.412 – 2.472 GHz (channel 1 to channel 13)802.11n 40 MHz BW (HT40): 2.422 – 2.462 GHz (includes all combinations of legal, bonded pairs of channels)5 GHz band802.11a/n 20 MHz BW (HT20): 5.180 – 5.320 GHz, 5.500 – 5.700 GHz, 5.745 – 5.825 GHz (channels 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165)802.11n 40 MHz BW (HT40/VHT40): 5.190 – 5.310 GHz, 5.510 – 5.670 GHz, 5.755 – 5.795 GHz (includes all combinations of legal, bonded pairs of channels)802.11ac 80 MHz BW (VHT80): 5.210 – 5.290 GHz, 5.530 – 5.690 GHz, 5.775 GHz (includes all combinations of legal, bonded pairs of channels)

Antennas 

Internal Wi-Fi Antennas: Three internal 2.4 GHz, 1.1 dBi peak, 5 GHz, 3.2 dBi peak antennas.

External Directional Antenna: Antenna, frequency range 2.4 – 2.5 and 4.9 – 5.9 GHz.

Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band.

AirCheck G2 Manager Software: Supported operating systems – Windows 8.1, Windows 10

Processor: 400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent (recommended) RAM 96 MB (minimum)

RAM: 256 MB (minimum); 512 MB (recommended)

Hard Disk: Up to 500 MB of available space may be required

Display: 1280 x 1024 high color, 32-bit (recommended)

Hardware: USB Port

Datasheet

Manual