NOSELAB ATS MEP Automatic Extrusion plastometer (80° ÷ 400°C)

Touch screen interface, colour LCD, settings and data management

Display of the last test performed

Facility to reject odd values, with reference to either other determinations, or tested material, or both

Integrated microprocessor for test management

PID electronic thermoregulation system with microprocessor accuracy 0.1°C, working temperature 80° ÷ 400°C

Configuration of the test parameters (temperature, pre-heating time, space of acquisition, density of the material, add-on weight) 28 preset conditions

Detection of 10 to 50 measurements each sample

Thermal stability ±0.2°C in the test area

Dimensions and material of the test chamber Ø 9.55 mm, steel (52/55 HRC)

Dimensions and material of the piston Ø 9.474 mm, height of the pressing part 6.35 mm, steel (45/50 HRC), equipped with thermally insulated guiding double collar, weight 0.325 g

Dimensions and material of the die inner Ø of the hole 2.095 mm, length 8 mm, steel (60/65 HRC)

The instrument is equipped with a cutting device of the extruded material, governed by an electronic timer which activates the blade automatically according to preset times, or operated manually any time, with a push-button

Turn-down furnace for easy cleaning

Datasheet