OMEGA CN38S-TC-DC1-R2 感度の高いタッチキーパッド付き温度オートチューンコントローラー (3 Digit LED)

Width: 35 mm

Height: 78 mm

Length: 64 mm

Weight: 180 g

Accuracy: ± 0.5 %

Burn-Out: At the end of scale

DC Pulse: Isolation: Output NOT isolated as regard the very low voltage parts; Logic State: 1: 12V ± 20% @ 1 mA, 10V ± 20%; @ 20 mA ; Logic State 0: <0.5V

Mounting: Flush in panel

Isolation: Reinforced isolation between low voltage (input and output relay) and frontal parts; reinforced isolation between low voltage and very low voltage parts (inputs, static outputs)

Input Type: Thermocouple

Resolution: 0.1°C

Form factor: 1/8 DIN

Device Class: Class II

Display Size: 47 mm (1.9 in)

Display Type: 3 Digit LED

Accuracy Note: ± (0.5% span ± 1 digit @25 °C

Output Detail: DC pulse/Relay;Output Action : Direct/reverse, programmable Contact : SPDT Contact Load : Out 1 - 8 A/250 Vac on resistive load - 3 A/250V Relay Electric Life : 100,000 operations

Output Signal: DC Pulse

Sampling Rate: 1 Hz (1 update/second)

Control Output: DC pulse, SPDT Relay

Supply Voltage: 100 to 240 Vac/Vdc

supply-voltage: 100 to 240 Vac/Vdc

Measuring Range: J: -40 to 999°C (-40 to 999°F) K: -40 to 999°C (-40 to 999°F)

Measurement Type: Temperature

Number of Inputs: 1

Display Type Note: 3-digit single display, red, 12 mm (0.47")

Enclosure Ratings: IP65

Relative Humidity: < 95 RH% without condensation

Supply Power Type: AC

Additional Features 1: °C or °F programmable

Display Updating Time: 1 s

Electrical Connection: Screw Terminal

Nominal Pulse Voltage: 2.5 KV

Thermistor Resistance: None

Enclosure Ratings Note: Front Protection: IP 65 (with gasket) according to EN60070-1 for indoor use Screw Terminal: IP20

Category of Overvoltage: II

Storage Temperature, Max: 60 °C

Storage Temperature, Min: -25 °C

Number of Control Outputs: 2

Cold Junction Compensation: Automatic compensation 0 to 50°C; Accuracy: 0.1°C/°C @ 25°C after a warm-up (instrument switch-on) of 20 minutes

Operating Temperature, Max: 50 °C

Operating Temperature, Min: 0 °C

Datasheet