OMEGA DRSP-I DINレール DC電流信号スプリッター（デュアル出力付き） (Current, 4 to 20 mA)

CMRR: 120 dB minimum

Width: 45 mm

Height: 117 mm

Length: 122 mm

Mounting: DIN Rail 35 mm Standard

Isolation: Isolation (Full 4-Way Isolation):input 1, output 1, output 2, power;1200 VRMS minimum

Linearity: Output Linearity: ±0.1% of span

Stability: ±0.04% of span per °C

Input Type: Current

Wire Gauge: 14 AWG

Output Value: Splitter

Output Detail: (Output 1 and Output 2): 4 to 20 mA;20V compliance, 1000 Ω at 20 mA Output Zero and Span: Multi-turn zero and span potentiometers for each output channel to compensate for load and lead variations; ±15% of span adjustment range typical Output Loop Power Supplies: One for each output channel; 20 Vdc nominal, regulated, 25 mA may be selectively wired for sinking or sourcing mA output. Output Functional Test: Front buttons set each output to test level when pressed; Each test level potentiometer adjustable 0 to 100% of span

Output Ripple: Output Ripple and Noise: <10 mVRMS

Output Signal: Current

Response Time: 70 ms typical

LED Indicators: Loop Status LEDs: Variable brightness LEDs indicate I/O loop level and status; One for input, one for each output

Supply Voltage: 60 to 265 Vac

Impedance Input: 50 Ω typical

Input Range Note: Input Loop Power Supply:15 Vdc ±10%, regulated, 25 mA;May be selectively wired for sinking or sourcing mA input;Loop Status LEDs: Variable brightness LEDs indicate I/O loop level and status; One for input, one for each output.

Number of Inputs: 1

Electrical Output: 4 to 20 mA

Enclosure Ratings: IP40

Supply Power Note: 60 to 265 Vac, 50/60 Hz or 85 to 300 Vdc, 6 W maximum

Supply Power Type: AC

Electrical Connection: Screw Terminal

Current Measurement Range: 4 to 20 mA

Operating Temperature, Max: 60 °C

Operating Temperature, Min: -10 °C

Datasheet