お得な情報を受け取る
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
クイックサポート
認定専門家へ直接アクセス
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
認定専門家へ直接アクセス
Hardness Units: HL, HRC, HRB, HB, HV, HSD
Inox: 20 ~ 62 (HRC), 46 ~ 101 (HRB), 85 ~ 655 (HB), 85 ~ 802 (HV).
Gray Iron: 93 ~ 334 (HB).
Iron Bridge (spheroidal iron): 131 ~ 387 (HB).
Aluminum Alloy: 30 ~ 159 (HB)
Brass: 14 ~ 95 (HRB), 40 ~ 173 (HB).
Bronze: 60 ~ 290 (HB).
Copper: 45 ~ 315 (HB).
Only model DL 2000 PCE is measured with a steel casting and cold steel.
2000 Model PCE measure for all such materials except for steel castings and steel cools.
The hardness values: HL, HRC, HRB, HB, HV, HSD
The measured material: Steel
Cold Steel & Steel (CWT.STEEL)
Inox
Iron GC (GC. IRON)
Iron NC (NC. IRON)
Aluminum alloy.
Brass.
Bronze.
Copper.
Accuracy: ± 4 HL for HL = 800 (± 1.0%)
Hardness measurements (largest): 940 HV
Radius of curvature (convex / concave) Rmin = 30 mm (with element 10 mm).
Minimum weight, measurements (to ensure the accuracy of the measurement).
5 kg no holder. 2 ~ 5 kg hold valuable.
50 g ~ 2 kg and the glue holding costs.
The minimum size measured 3 mm material (adhesive)
Minimum penetration levels in surface measurements: 0.8 mm
Connectors: RS-232
Memory: 1250 groups (data, measured values ..).
Source: 2 AAA batteries (1.5 V)
Highest operating temperature (sensor): +120 ° C
Dimensions: 108 x 62 x 25 mm
Weight: 180 g
Supply includes:
May or may PCE PCE-2000-2000 DL, sensor cable length 1.5 m, cleaning brush, glue stick, standard hardness test blocks, carrying case and user manual.
Discontinued
