PICO 3416E MSO USB駆動PCオシロスコープ (200 MHz 4 channel, digital channels)

Vertical (analog channels)

Input channels: 4

Bandwidth (–3 dB): 200 MHz

Rise time (10% to 90%, −2 dB full scale): 1.75 ns

Selectable bandwidth limits: 20, 50, 100, 200 MHz

Vertical resolution: 8 bits, 10 bits

Enhanced vertical resolution (software): Hardware resolution + 4 bits

Input connector: BNC(f)

DC gain accuracy: ±(1% of signal + 1 LSB)

DC offset accuracy :±(2% of full scale + 200 µV); Offset accuracy can be improved by using the “zero offset” function in PicoScope.

LSB size (quantization step size)

+  8-bit mode: < 0.4% of input range

+  10-bit mode: < 0.1% of input range

Analog offset range(vertical position adjustment): 

±250 mV (±5 mV to ±200 mV ranges)

±2.5 V (±500 mV to ±2 V ranges)

±5 V (±5 V range, 50 Ω input)

±20 V (±5 V to ±20 V ranges, 1 MΩ input)

Analog offset control accuracy :  ±1% of offset setting, additional to DC accuracy above

Overvoltage protection

1 MΩ:  ±100 V (DC + AC peak) up to 10 kHz

50 Ω:  5.5 V RMS max, ±20 V pk max

Vertical (digital channels) - MSO only

Input channels: 16 (2 logical ports of 8 channels each)

Input connector: 2.54 mm pitch, 10 x 2 way connector

Maximum input frequency: 100 MHz (200 Mbit/s)

Minimum detectable pulse width :5 ns

Threshold grouping: Two independent threshold controls. Port 0: D0 to D7, Port 1: D8 to D15

Threshold range: ±5 V

General specifications

PC connectivity: USB 3.0 SuperSpeed (USB 2.0 compatible)

PC connector type: USB 3.0 Type-C

Power requirement: Powered from single USB Type-C 3 A port or from USB port plus external Type-C PSU (5 V, 3 A)

Status indicators: RGB LED per BNC connector plus power and status

Thermal management :Automatic fan speed control for low noise

Dimensions: 221 x 173 x 30 mm

Weight: < 0.7 kg

Ambient temperature range

Operating: 0 to 40 °C

For quoted accuracy: 15 to 30 °C after 20-minute warm-up

Storage: –20 to +60 °C

Humidity range: Operating 5 to 80 %RH non-condensing; Storage: 5 to 95 %RH non-condensing

Altitude: Up to 2000 m

Pollution degree: EN 61010 pollution degree 2: “only nonconductive pollution occurs except that occasionally a temporary conductivity caused by condensation is expected”

Safety compliance: Designed to EN 61010-1

EMC compliance: Tested to EN 61326-1 and FCC Part 15 Subpart B

Environmental compliance: RoHS, REACH & WEEE

Datasheet