お得な情報を受け取る
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
クイックサポート
認定専門家へ直接アクセス
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
認定専門家へ直接アクセス
Applications:
+ Point-of-use monitoring troubleshooting
+ 2.8 LPM flow rate does not disrupt air flow and 10 nm sensitivity provides essential data for hard disk manufacturing
+ Manufacturing quality control of ultra-fine nanoparticles size distribution during synthesis
+ Detection of airborne ultra-fine and nanoparticles in workplaces and other sensitive environments
Size range: 10 – 1,000 nm
Aerosol flow rate: 2.8 LPM (0.1CFM) ±5%
Sampling period: 10 to 600 seconds, user-selectable
Max. particle concentration: 10^5/L
Instrument warm-up time: 5 minutes nominal at 22 °C ambient
Working fluid: Proprietary non-hazardous organic compound
Working fluid consumption and instrument volume: 2,000 hours between refills; Reservoir has a volume of 20 ml when full.
Laser classification: Class 1, complies with US 21 CFR 1040.10 and EN60825-1; Internally an enclosed Class 3B laser is used per EN60825-1.
Data storage: >1,000 days of continuous sampling
Dimensions, l,w,h: 11.8 x 13 x 10.2 in (30 x 33 x 26 cm)
Weight: 6 kg
Power: 100 – 240 VAC, 1.5 A, 50/60 Hz
Data output/communications: USB flash drive and ModBus TCP/IP
User interface: Color front-mounted touchscreen. Optional USB mouse (not supplied)
Temperature range: 15 – 28 °C
Humidity range: 10 – 90% RH, non-condensing
Operating pressure: 1 Atmosphere (ambient)
Maximum altitude: 2,000 m
Use: Indoor use only
