お得な情報を受け取る
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
クイックサポート
認定専門家へ直接アクセス
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
認定専門家へ直接アクセス
Reliable measurement of process pressure.
Pressure transmitters measure the pressure of neutral gases and nitrogen in piping and closed containers. The pressure of the medium being measured acts on a pressure cell, which converts the pressure into an electronic signal.
Field of Application:
The process pressure transmitters are ideal for measurement of absolute pressure in applications with fast temperature changes and in compressed air, HVAC and pneumatic systems.
Features:
Compact and robust construction
Piezo-resistive steel sensor
Zero and range adjustable with internal potentiometer
IP protection IP65
DEVICE TYPE: Process pressure transmitter
PARAMETERS: Absolute pressure
RANGE OF APPLICATION: -30…80 °C
MEASURING RANGE: 0…10 bar
MEASUREMENT PRINCIPLE: Piezo-resistive steel sensor
PRESSURE RESISTANCE: 15 bar
MEDIUM: Air and non-aggressive gases
ACCURACY AT 20 °C ±2 K (LINEARITY, HYSTERESIS, REPEATABILITY, DEVIATION OF START AND END VALUE OF THE MEASUREMENT RANGE): ±0.25 % FS max.
TK ZERO: ±0.03 %FS/K
TK RANGE: ±0.03 %FS/K
POWER CONSUMPTION: 15…30 VDC
LONG-TERM STABILITY: ±0.2 % full scale / year
CONNECTION: G ½” male thread
SEAL RING: Viton
ELECTRICAL CONNECTIONS: Hirschmann (DIN 43650)
ANALOG OUTPUT SIGNAL (STANDARD): 4…20 mA, two-wire
PERMISSIBLE LOAD: <750 Ω
HOUSING: Stainless steel 1.4301
DIAPHRAGM: Stainless steel (1.4404)
IP PROTECTION RATING: IP65
MOUNTING: 90 ° to pressure pipe (max. 30 ° inclination)
CE / EMC CONFORM: EMC Directive 2004/108/EC, EN 61326
STORAGE AND TRANSPORT CONDITIONS: -30…80 °C
DIMENSIONS: 137 x 41 x 27 mm
