Rotronic HF5-EX 2チャンネル送信機

The new HygroFlex5-EX series is the latest development in two-channel transmitters for the exact measurement of humidity and temperature in explosive atmospheres. This device conforms to the latest international 

standards. The HF5-EX series consists of a robust aluminium transmitter with or without display. The attached probes are cast into a stainless steel tube, and are certified for operation in Zone 0/20. The transmitter itself is 

certified for Zone 1/21.

Features 

• Measurement of relative humidity and temperature, optional output of dew point and other calculated parameters

• Safe operation in areas with explosion risk

• Intrinsically safe electrical probe

• Interchangeable stainless steel probes

• Robust aluminium housing

OPERATING RANGE: -40…60 °C / -10…60 °C (Models with display) 0…100 %rh, non-condensing

ACCURACY AT 23 ±5 °C: ±0.8 %rh / ±0.1 K

MEASURING RANGE WITH INTERCHANGEABLE PROBE: 0…100 %rh and -40…85 °C

ACCURACY ANALOG OUTPUT: <20 μA

POWER SUPPLY: 10…28 VDC

CURRENT CONSUMPTION: 2x24 mA start up / 2x20 mA operation

HUMIDITY SENSOR: Probe dependent

TEMPERATURE SENSOR: Probe dependent

PSYCHROMETRIC CALCULATIONS: All psychrometric values

NUMBER OF PROBE INPUTS: 1

START-UP TIME: Standard cold <60 s / warm <30 s

MEASUREMENT INTERVAL: 20…240 s

DISPLAY TYPE: Optional graphics display. Presentation configurable.

BACKLIGHT: without Backlight

TREND INDICATOR: Yes, for models with display

PROBE ADJUSTMENT BY SOFTWARE: Not via device menu (only outside the explosive zone with HW4 + AC3001)

FIRMWARE UPDATE: With internet and HW4 software

USER INFORMATION: from Software HW4 (devicemanager)

DATA PROCESSING VIA HW4: Graphics, statistics, analysis, qualification, etc.

CIRCUIT TYPE: 2 wire

ANALOGUE OUTPUTS SCALEABLE BY THE USER: Yes

ANALOG OUTPUT SIGNAL (STANDARD): 4…20 mA, two-wire

GALVANIC SEPARATION OUTPUT SIGNALS: Yes

SERVICE INTERFACE: UART (internal in device)

PROBE MATERIAL: Stainless steel

ENCLOSURE MATERIAL: Aluminium (DIN EN 1706 EN AC-AlSi 12 (Fe))

CABLE CONNECTIONS: 

 Connections: Ex-e terminals (0.2…2.5 mm2)

 Cable gland: 16 x 1.5 (Ø cable 4.5…7 mm)

IP PROTECTION RATING: IP66

FDA/GAMP COMPATIBILITY: FDA 21 CFR Part 11 and GAMP compatible

CE / EMC CONFORM: 2014/30/EU

ATEX DIRECTIVES: 2014/34/EU (ATEX) CSA22.2, UL 508

EX IDENTIFICATION:

 EX II 2(1) G Ex eb mb [ia Ga] IIC T5 Gb

 EX II 2(1) D Ex tb [ia Da] IIIC T80°C Db

IDENTIFICATION EX NORTH AMERICA:

 Class I, Div 1/2, Groups ABCD T5…T4,

 Class II, Div 1/2, Groups EFG T80°C…T110°C

 Ex e mb [ia Ga] IIC T5...T4 Ga/Gb

 Ex tb [ia Da] IIIC T80°C…T110°C Da/Db

 Class I, Zone 0/1, AEx e mb [ia Ga] IIC T5…T4 Ga/Gb

 Class II, Zone 20/21, AEx tb [ia Da] IIIC T80°C…T110°C Da/Db

DIMENSIONS: 160 x 100 x 61 mm

Catalog