お得な情報を受け取る
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
クイックサポート
認定専門家へ直接アクセス
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
認定専門家へ直接アクセス
Ⅰ: Specification of this Breakdown Voltage Bdv Tester
1. Output voltage: 0～80KV (100KV optional)
2. Voltage distortion rate: ＜3%
3. Booster capacity: 1.5KVA
4. Measuring accuracy: ±3％
5. Supply voltage: AC220V±10% 50Hz±1 Hz
6. Power: 200W
7. Applicable temperature: 0℃～45℃
8. Applicable humidity: ＜75%RH
Ⅱ: Features about the Transformer Oil BDV tester
1. This instrument uses a microprocessor to complete operations such as boosting, holding, stirring, static release, calculation, printing automatically., and can perform oil circulation pressure test within the range of 0-100KV.
2. Large-screen LCD display
3. Simple operation, the operator only needs to make simple settings, and the instrument will automatically complete the pressure test of 1 cup of oil sample according to the settings. The breakdown voltage value and cycle times of 1 to 6 times are automatically stored. After the test is completed, the printer can print out the breakdown voltage value and average value of each time.
4. Power-off retention, test results storage up to 100 sets, and can display the current ambient temperature and humidity.
5. The single-chip microcomputer is used to boost the voltage at a constant speed, and the voltage frequency is accurate to 50HZ, which makes the whole process easy to control.
6. With over-voltage, over-current, limit protection, etc., to ensure the safety of operators.
7. With temperature measurement display function and system clock display.
8. Standard RS232 interface, which can communicate with computer.
Ⅲ: Maintenance for the Oil breakdown voltage tester
1.This Transformer Oil Dielectric Strength Test Equipment shall not be exposed in moist environment.
2. Keep the oil cup and the electrodes clean. Fill the cup with fresh transformer oil for protection during its idle. Check the electrode distance and check the tightness between the electrode tip and electrode bar screw thread before the cup is used again.
