Senseca HD2KZ1-010GM025A フロースイッチ (2.5 - 25 l/min, DN 10, brass construction, frontal measurement display Z1)

With frontal measurement display at Z1

Switch: reed switch

Nominal width: DN 10

Process connection: female thread G 3/8

Switching range: 2.5 - 25 l/min

Pressure loss: 1.9 ~2.9 bar at Qmax.

Qmax.: to 35 l/min

Tolerance: ±5 % of full scale value

Pressure resistance: PN 200 bar optionally PN 500 bar

Media temperature: -20..+120 ℃

Ambient temperature: -20..+70 °C

Media: water (oils and aggressive media available on request)

Switching voltage: Max. 175 V DC / 120 V AC

Switching current: Max. 0.25 A DC / 0.18 A AC

Switching capacity: Max. 5 W / VA

Protection: class 2 - safety insulation

Ingress protection: IP 65

Electrical connection: plug DIN 43650-A / ISO 4400, optionally round plug connector M12x1, 4-pole

Materials medium-contact

Brass construction: CW614N nickelled, CW614N, 1.4310, hard ferrite, NBR

Non-medium contact materials: PA, CW614N, NBR

Installation location

Standard: horizontal inwards flow from the left; other installation positions are possible; the installation position affects the switching point and range. 

For details please see Datasheet

Datasheet