Teledyne Lecroy HVD3106A High Voltage Differential Probes (1kV, 120 MHz)

Bandwidth: 120 MHz

Input Coupling: DC only

Input Impedance:

10 MΩ || 2.5 pF (between inputs)

5 MΩ || 5.0 pF (either input to ground)

Attenuation: 50x / 500x

Rise Time (10-90%): 2.9 ns

Differential Voltage Range (High Attenuation):

1500 V (DC + peak AC) from 7 to 500 V/div with up to 1500V offset.

2000 V maximum typical measurable differential voltage before saturation

Differential Voltage Range (Low Attenuation): 27.6 V (DC + peak AC) from 100 mV/div to 6.9 V/div with up to 150V offset.

Common Mode Voltage Range: ±1500 V (DC + peak AC), 1000 Vrms (CAT III) (either input to ground)

Maximum Input Voltage to Earth: ±2000 Vpk (nominal, either input to ground)

Max Safe Input:

1000 Vrms CAT III

per IEC/EN 61010-031/A1:2008

Sensitivity:

100 mV/div to 6.9V/div (50X)

7V/div to 500V/div (500X)

Gain Accuracy: 1% (LF, guaranteed)

Slew Rate: 400 V/ns (maximum)

Output Coupling: AC or DC coupling

Output Termination: 1 MΩ

Interface: ProBus

Input Lead Length: 40 cm input lead length

Cable Length (input lead to oscilloscope connection): 2.25 m

Datasheet