Terasic SoCKit 新しいSoCデバイスの開発キット

1. FPGA Device
    Cyclone V SX SoC—5CSXFC6D6F31C6N
    110K LEs, 41509 ALMs
    5140 M10K memory blocks
    6 FPGA PLLs and 3 HPS PLLs
    2 Hard Memory Controllers
    3.125G Transceivers
2. ARM®-based hard processor system (HPS)
    925 MHz, A Dual-Core ARM Cortex™-A9 MPCore™ Processor
    512 KB of shared L2 cache
    64 KB of scratch RAM
    Multiport SDRAM controller with support for DDR2, DDR3, LPDDR1, and LPDDR2
    8-channel direct memory access (DMA) controller
3. Configuration and Debug
    Quad Serial Configuration device – EPCQ256 for FPGA
    On-Board USB Blaster II (mini USB type B connector)
4. Memory Devices
    1GB (2x256MBx16) DDR3 SDRAM on FPGA
    1GB (2x256MBx16) DDR3 SDRAM on HPS
    64MB QSPI Flash on HPS
    Micro-SD Card Socket on HPS
    EPCQ256 Flash on FPGA
5. Communication
    USB 2.0 OTG (ULPI interface with mini USB type AB connector)
    USB to UART (mini USB type B connector)
    10/100/1000 Ethernet
6. Connectors
    One HSMC (8-channel Transceivers, Configurable I/O standards 1.5/1.8/2.5/3.3V)
    One LTC connector (One Serial Peripheral Interface (SPI) Master ,one I2C and one GPIO interface )
7. Display
    24-bit VGA DAC
    128x64 dots LCD Module with Backlight
8. Audio
    24-bit CODEC, Line-in, line-out, and microphone-in jacks
9. Switches, Buttons and LEDs
    8 User Keys (FPGA x4 ; HPS x 4)
    8 User Switches (FPGA x4 ; HPS x 4)
    8 User LEDs (FPGA x4 ; HPS x 4)
    2 HPS Reset Buttons (HPS_RSET_n and HPS_WARM_RST_n)
10. Sensors
    G-Sensor on HPS
    Temperature Sensor on FPGA
11. Power
    12V DC input
12. Kit Contents
    SoCKit Board
    SoCKit Quick Start Guide
    Power DC Adapter (12V)
    Ethernet Cat 5e Cable
    Mini usb cable x2

Catalog