TOA DKK CM-42X 実験室用導電率計

-Measurement method:

 +Conductivity: AC 2-Electrode Method

 +Temperature: Thermistor Resistor

-Conductivity Measuring frequency: 80Hz/3kHz Auto-selection

-Display unit: Touch panel color graphic LCD

-Measurement Item/Range:

 +Conductivity: Depends on the cell

 +Resistivity: Depends on the cell

 +Salinity: Conversion from conductivity

 +Concentration: Conversion from conductivity

 +TDS: Conversion from conductivity

 +Temperature: 0.0 ～100.0℃

-Display Range:

 +Conductivity （Manual/Auto Range Switching） （Depending on the cell）: 

0.0 ～ 200.0μS/m （0.000 ～ 2.000μS/cm）

0.000 ～ 2.000mS/m （0.00 ～ 20.00μS/cm）

0.00 ～ 20.00mS/m （0.0 ～ 200.0μS/cm）

0.0 ～ 200.0mS/m （0.000 ～ 2.000mS/cm）

0.000 ～ 2.000S/m （0.00 ～ 20.00mS/cm）

0.00 ～ 20.00S/m （0.0 ～ 200.0mS/cm）

0.0 ～ 200.0S/m （0.000 ～ 2.000S/cm）

SI unit （S/m） or （S/cm） selectable

 +Resistivity （Manual/Auto Range Switching） （Depending on the cell）:

0.005 ～ 2.000 Ω･m （0.5 ～ 200.0Ω･cm）

0.00 ～ 20.00 Ω･m （0.000 ～ 2.000kΩ･cm）

00.0 ～ 200.0 Ω･m （0.00 ～ 20.00kΩ･cm）

0.000 ～ 2.000kΩ･m （0.0 ～ 200.0kΩ･cm）

0.00 ～ 20.00kΩ･m （0.000 ～ 2.000MΩ･cm）

00.0 ～ 200.0kΩ･m （0.00 ～ 20.00MΩ･cm）

0.000 ～ 2.000MΩ･m （0.0 ～ 200.0MΩ･cm）

0.00 ～ 20.00MΩ･m （0 ～ 2000MΩ･cm）

SI unit (S/m) and conventional unit (S/cm) selectable

 +Salinity: 

0.00 ～ 4.04% （NaCl）

0.00 ～ 42.40psu （PSS:Sea water salinity）

 +Concentration（Automatic Range Switching）:

0 ～ 2.000%

0 ～ 20.00%

0 ～ 200.0%

 +TDS （Manual/Auto Range Switching）:

0 ～ 99.99mg/L

0 ～ 999.9mg/L

0 ～ 9.999g/L

0 ～ 99.99g/L

0 ～ 999.9g/L

 +Temperature: -5.0 ～110.0℃

- Repeatability（Meter main unit）:

 +Conductivity: ±0.5% FS

 +Resistivity: ±0.5% FS 

 +Salinity: ±0.5% FS

 +Concentration: ±0.5% FS

 +TDS: ±0.5% FS

 +Temperature: within ±0.2℃

-Temperature Compensation:

 +Temperature Compensation Range:

ATC （Auto Temperature Compensation）：0 ～100.0℃

MTC（Manual Temperature Compensation）：0 ～100.0℃

 +N/A: ATC　OFF

 +Standard Temperature Setting: 0 ～100.0℃

 +Temperature Coefficient（Linear）: 0 ～10.00％／℃ 

 +Temperature Coefficient（Curve）: 2-10 points

 +Pure Water Dual Temperature Compe.: yes

-Concentration Conversion Setting: 2-10 points 

-Temperature Calibration: 1-point Calibration

-Performance Guaranteed Temperature, Humidity: 0 ～ 45℃　85％ or below（condensation-free）

-Data Memory: 2000 data

-Print Function: Connectable to optional external printer EPS-P30

-Auto Hold Fuction: yes

-Auto Hold Conditions Setting: yes

-Statistical Calculation Function: Average value

-Calibration History Creation Function: Max.20 run lots each Channel, 10 electrode Types

-Interval Measurement: yes

-Security Function: yes

-Upper/Lower Limit Output Setting: yes

-External Input/Output:

 +RS-232C Interface: yes （2ch）

 +USB （Host）: yes

 +USB (peripheral, Micro): yes

 +External Instrument Connection: yes

 +Analog Output: Meas. Value: 0 ～1VFS; Range: 100mV/range; Alarm Upper: Limit: Open Collector, Lower Limit: Open Collector 

-Option Connection:

 +External Printer: yes

 +Turntable （TTT510/710）: yes

 +Cell Switch （ES-1GC）: yes

 +Control Box （AC-1V）: yes

-Power Source: AC100 ～ 240V （Special AC Adapter）

-Power Consumption: Approx.12VA

-Main Unit Dimensions （Excluding Protruding Parts）: Approx.130 W×60 H×230 Dmm

-Main Unit Weight: Approx. 0.8kg 

-Inluding:

+ Main unit

+ Sensor Holder: 7430850K

+ Sensor stand (Stand, strut, stopper): 7430860K

+ Tilt stand: 7430870K

+ Sensor attachment (G): 0IB00004

+ Conductivity sensor: CT-58101B

+ AC adapter: 7430880K

+ Power cord (2P conversion adapter included):

118C229

+ Ground wire (2m): X0979500

+ Beakers (150mL): 0DE00001

+ Manual

-Tính năng:

+ Màn hình cảm ứng màu hiện đại

+ Có 2 cổng kết nối (chức năng nhận dạng tự động)

+ Tự động nhận diện PC, bàn xoay, máy in

+ Thiết bị chuẩn USB

+ Chức năng bộ nhớ dữ liệu

Dải đo:

0-200,0 S / m

0-20,00 MΩ · m

Chloride 0-4,00%

Nồng độ 0-200%

0-100 ° C

Ứng dụng: Sản phẩm này được sử dụng để đo độ dẫn điện, điện trở, độ mặn, TDS trong phòng thí nghiệm.

Datasheet