TOA DKK MM-43X マルチインジケーター水質計

-Measurement Method:

 +pH: Glass Electrode Method

 +ORP: Platinum Electrode

 +Ion: Ion Electrode Method

 +Conductivity: AC 2-Electrode Method

 +DO: Membrane Polarographic Method

 +Temperature: Thermistor Resistor

-Conductivity Measuring Frequency: 80Hz/3kHz automatic selection

-Electrode Inputs: 2ch (pH/ORP/Ion/DO Electrode/Conductivity cell connectable)

-Display Unit: Touch Panel Color Graphic LCD

-Display: Selectable 2-ch Simultaneous Display or Single Only Display

-Measurement Item/Range:

 +pH: pH 0.000 ～14.000

 +ｍV（ORP）: -2000.0 ～ 2000.0 mV

 +Ion: Depends on the sensor

 +Conductivity: Depends on the cell

 +Resistivity: Conversion from conductivity Depend on the cell

 +Salinity: Conversion from conductivity

 +Concentration: Conversion from conductivity

 +TDS: Conversion from conductivity

 +DO: Depends on the electrode Saturation %

 +Temperature: 0.0 ～100.0℃; DO:0.0 ～ 50.0℃; Ion:Depends on the sensor (No temperature measurement function)

-Display Range:

 +pH: pH-2.000 ～16.000

 +mV （ORP）: -2200.0 ～ 2200.0 mV

 +Ion （Manual/Auto range switching） （mol/L selectable）: 

  ZOOM　OFF:

  0.0 ～19.9μg/L

  20 ～199μg/L

  0.20 ～1.99mg/L

  2.0 ～19.9mg/L

  20 ～199mg/L

  0.20 ～1.99g/L

  2.0 ～19.9g/L

  20 ～199g/L

  200 ～1990g/L

  ZOOM　OＮ:

  0.00 ～19.99μg/L

  20.0 ～199.9μg/L

  0.200 ～1.999mg/L

  2.00 ～19.99mg/L

  20.0 ～199.9mg/L

  0.200 ～1.999g/L

  2.00 ～19.99g/L

  20.0 ～199.9g/L

  200 ～1999g/L

 +Conductivity（Manual/Auto range switching）（Depends on the cell）

0.0 ～ 200.0μS/m （0.000 ～ 2.000μS/cm）

0.000 ～ 2.000mS/m （0.00 ～ 20.00μS/cm）

0.00 ～ 20.00mS/m （0.0 ～ 200.0μS/cm）

0.0 ～ 200.0mS/m （0.000 ～ 2.000mS/cm）

0.000 ～ 2.000S/m （0.00 ～ 20.00mS/cm）

0.00 ～ 20.00S/m （0.0 ～ 200.0mS/cm）

0.0 ～ 200.0S/m （0.000 ～ 2.000S/cm）

SI unit (S/m) and conventional unit (S/cm) selectable

 +Resistivity（Manual/Auto range switch）（Depends on the cell）

0.005 ～ 2.000 Ω･m （0.5 ～ 200.0Ω･cm）

0.00 ～ 20.00 Ω･m （0.000 ～ 2.000kΩ･cm）

00.0 ～ 200.0 Ω･m （0.00 ～ 20.00kΩ･cm）

0.000 ～ 2.000kΩ･m （0.0 ～ 200.0kΩ･cm）

0.00 ～ 20.00kΩ･m （0.000 ～ 2.000MΩ･cm）

00.0 ～ 200.0kΩ･m （0.00 ～ 20.00MΩ･cm）

0.000 ～ 2.000MΩ･m （0.0 ～ 200.0MΩ･cm）

0.00 ～ 20.00MΩ･m （0 ～ 2000MΩ･cm）

SI unit (Ω･m) and conventional unit (Ω･cm) selectable

 +Salinity: 

0.00 ～ 4.04% （NaCl）

0.00 ～ 42.40psu (PSS:Sea water salinity)

 +Concentration（Auto range switch）:

0 ～ 2.000%

0 ～ 20.00%

0 ～ 200.0%

 +TDS（Manual/Auto range switch）:

0 ～ 99.99mg/L

0 ～ 999.9mg/L

0 ～ 9.999g/L

0 ～ 99.99g/L

0 ～ 999.9g/L

+Dissolved Oxygen: 0.00 ～ 22.00mg/L (High range membrane set (Option)　0.00 ～55.0mg/L)

 +Saturation: % 0 ～ 220.0% (High range membrane set (Option) 0 ～ 550%)

 +Temperature: -5.0 ～110.0℃

-Display Resolution Switching:

 +pH:　 0.01pH/0.001pH

 +mV （ORP）: 1mV/0.1mV

 +Ion: 0.0μg/L～1990g/L (Maximum to 3 digits); 0.00μg/L～1999g/L (Maximum 4 digits)

-Repeatability（Main body unit）:

 +pH: ±0.002pH

 +mV （ORP）: ±0.2mV

 +Ion: ±0.5% FS

 +Conductivity: ±0.5% FS

 +Resistivity: ±0.5% FS

 +Salinity: ±0.5% FS

 +Concentration: ±0.5% FS

 +TDS: ±0.5% FS

 +Dissolved Oxygen:  ±0.03mg/L (Standard membrane); ±0.1mg/L (High range membrane)

 +Saturation: % ±1% (Standard membrane/High range membrane)

 +Temperature: within ±0.2℃

-Temperature compensation:

 +pH: Temp. compensation range: ATC （Auto Temperature Compensation）: 0 ～100.0℃; MTC （Manual Temperature Compensation）: 0 ～100.0℃

 +Conductivity: 

Temp. compensation range: ATC （Auto Temperature Compensation）: 0 ～100.0℃; MTC （Manual Temperature Compensation）: 0 ～100.0℃

N/A: ATC　OFF

Standard Temp. setting: 0 ～100.0℃

Temperature Coefficient（Linear）: 0 ～10.00％／℃

Temperature Coefficient（Multipoint）: 2 ～10 points

Pure Water Dual Temperature Compensation: yes

 +Dissolved Oxygen: Temperature Compensation Range: ATC （Auto Temperature Compensation）: 0～ 50.0℃;

-pH calibration: JIS pH Standard Solution, US Standard Solution,　Custom Standard Solution, Max. 5-point Calibration

-Ion calibration: Max.5-point Calibration

-DO calibration: Auto Calibration （Zero Span Calibration）

-Temp. calibration: 1-point Calibration

-Conductivity Concentration Conversion Setting: 2-10 points

-DO Salinity Compensation Setting: yes

-DO ATM Pressure Compensation Setting: yes

-Performance Guaranteed Temperature, Humidity: 0 ～45℃　85％ or below （Condensation-free）

-Data Memory: 2000 data each channel

-Print Function: Optional External Printer EPS-P30

-Auto Hold Function: yes

-Auto Hold Conditions Setting: yes

-Statistical Calculation Function: Average Value

-Calibration History Creation Function: Max. 20 run lots

-Interval Measurement: yes

-Security Function: yes

-Upper/Lower Limit Output Setting: yes （1ch only）

-External Input/Output:

 +RS-232C Interface: yes （2ch）

 +USB （Host）: yes

 +USB （Peripheral, Micro）: yes

 +Analog Output:

pH:　 ±700mV （pH0 ～ 14）

mV （ORP）: ±1V （0 ～ ±2000mV）

Ion: 0 ～1VFS

Conductivity/Resistivity/Salinity/Concentration/TDS: 0 ～1VFS

DO/Saturation: 0 ～1VFS

Range(Ion/Conductivity/Resistivity/Salinity/Concentration/TDS): 100mV/Range

Temperature: 0 ～1V （0 ～100℃）

Alarm (1ch only): Upper Limit: Open Collector　; Lower Limit: Open Collector

-Option Connection:

 +External Printer: yes

 +Turntable （TTT510/710）: yes

 +Electrode Selector（ES-1G）: yes

 +Cell Selector （ES-1GC）　: yes （Single option can be connected to ch-1）

 +Control Box （AC-1V）: yes （For ch-1 only）

-Power Source: AC100 ～ 240V （AC Adapter）

-Power Consumption: Approx. 18VA

-Main Unit Dimensions（Excluding Protruding Parts）: Approx. 130 W×60 H×230 D mm

-Main Unit Weight: Approx. 0.9kg

-Inluding:

+ Main unit

+ Sensor Holder: 7430850K

+ Sensor stand (Stand, strut, stopper): 7430860K

+ Tilt stand: 7430870K

+ Sensor attachment (G): 0IB00004

+ Sensor attachment (J): 0IB00005

+ Sensor attachment (DP): 0IB00007

+ Sensor attachment (ION): 0IB00006

+ AC adapter: 7430880K

+ Power cord: 118C229

+ Ground wire (2m): X0979500

+ Beakers (150mL): 0DE00001 (3pcs)

+ Manual

*Note*: Sensors are not included. Necessary ones will ve sold separately.

-Tính năng:

+ Màn hình cảm ứng màu hiện đại

+ Mỗi kênh có thể được kết nối với các điện cực pH/ORP/Ion/DO/Độ dẫn điện

+ Có 2 cổng kết nối (chức năng nhận dạng tự động)

+ Tự động nhận dạng PC, bàn xoay, máy in

+ Thiết bị chuẩn USB

+ Chức năng bộ nhớ dữ liệu lớn(2.000 dữ liệu mỗi kênh)

Các hạng mục đo:

pH, ORP, độ dẫn điện, điện trở, độ mặn, ion, nhiệt độ, DO, bão hòa.

Ứng dụng: Thiết bị này dùng để đo pH, độ dẫn điện, điện trở, độ mặn, DO,TDS, nồng độ trong phòng thí nghiệm.

Datasheet