お得な情報を受け取る
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
クイックサポート
認定専門家へ直接アクセス
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
認定専門家へ直接アクセス
1. Output voltage ratings: 80 kV
2. Output frequency: 0.1Hz, 0.05Hz, 0.02Hz
3. Load capacity： 0.1Hz maximum 1.1µF
0.05Hz maximum 2.2µF
0.02Hz maximum 5.5µF
4. Measurement accuracy: 3%
5. Positive and negative voltage peak errors: ≤ 3％
6. Voltage wave form distortion: ≤ 5％
7. Use condition: temperature: -10℃~+40℃; Humidity: ≤ 85％RH
8. Power supply fuse tube: 10A
9. Power: AC 50Hz, 220V ±5%
Datasheet
Product features
1. Data of current, voltage, wave form can be directly sampled at high voltage side, so the data is real and accurate.
2. Over-voltage protection: If the output exceeds the set limit of voltage, the instrument will shut-down to protect itself, the actuation time is less than 20ms.
3. Over-current protection: Very Low Frequency HV Test Set is high-low voltage dual protection in the design, the accurate shut-down protection can be made according to the set value at high voltage side; If the current on low voltage side exceeds the rated current, the instrument will take shut-down protection, the actuation time are both less than 20ms.
4. High-pressure output resistance design in the booster, so don't need another outside protective resistance.
5. The adoption of high and low pressure closed loop feedback control circuit, so the output is no let up effect.
