TOA DKK CM-41X 実験室用導電率計
生産者: TOA DKK Model: CM-41X 起源: Japan 品物を保証します: 12 Month - 連絡先
-Measurement method:
+Conductivity: AC 2-Electrode Method
+Temperature: Thermistor Resistor
-Conductivity Measuring frequency: 80Hz/3kHz Auto-selection
-Display unit: Customized LCD
-Measurement Item/Range:
+Conductivity: Depends on the cell
+Resistivity: Depends on the cell
+Salinity: Conversion from conductivity
+TDS: Conversion from conductivity
+Temperature: 0.0 ~100.0℃
-Display Range:
+Conductivity (Manual/Auto Range Switching) (Depending on the cell):
0.0 ~ 200.0μS/m (0.000 ~ 2.000μS/cm)
0.000 ~ 2.000mS/m (0.00 ~ 20.00μS/cm)
0.00 ~ 20.00mS/m (0.0 ~ 200.0μS/cm)
0.0 ~ 200.0mS/m (0.000 ~ 2.000mS/cm)
0.000 ~ 2.000S/m (0.00 ~ 20.00mS/cm)
0.00 ~ 20.00S/m (0.0 ~ 200.0mS/cm)
0.0 ~ 200.0S/m (0.000 ~ 2.000S/cm)
SI unit (S/m) or (S/cm) selectable
+Resistivity (Manual/Auto Range Switching) (Depending on the cell):
0.005 ~ 2.000 Ω・m (0.5 ~ 200.0Ω・cm)
0.00 ~ 20.00 Ω・m (0.000 ~ 2.000kΩ・cm)
00.0 ~ 200.0 Ω・m (0.00 ~ 20.00kΩ・cm)
0.000 ~ 2.000kΩ・m (0.0 ~ 200.0kΩ・cm)
0.00 ~ 20.00kΩ・m (0.000 ~ 2.000MΩ・cm)
00.0 ~ 200.0kΩ・m (0.00 ~ 20.00MΩ・cm)
0.000 ~ 2.000MΩ・m (0.0 ~ 200.0MΩ・cm)
0.00 ~ 20.00MΩ・m (0 ~ 2000MΩ・cm)
SI unit (Ω・m) and conventional unit (Ω・cm) selectable
+Salinity:
0.00 ~ 4.04% (NaCl)
0.00 ~ 42.40 (PSS:Sea water salinity)
+TDS (Manual/Auto Range Switching):
0 ~ 99.99mg/L
0 ~ 999.9mg/L
0 ~ 9.999g/L
0 ~ 99.99g/L
0 ~ 999.9g/L
+Temperature: -5.0 ~110.0℃
- Repeatability(Meter main unit):
+Conductivity: ±0.5% FS
+Resistivity: ±0.5% FS
+Salinity: ±0.5% FS
+TDS: ±0.5% FS
+Temperature: within ±0.2℃
-Temperature Compensation:
+Temperature Compensation Range:
ATC (Auto Temperature Compensation):0 ~100.0℃
MTC(Manual Temperature Compensation):0 ~100.0℃
+N/A: ATC OFF
+Standard Temperature Setting: 25℃ fixed
+Temperature Coefficient(Linear): 0 ~10.00%/℃
-Temperature Calibration: 1-point Calibration
-Performance Guaranteed Temperature, Humidity: 0 ~ 45℃ 85% or below(condensation-free)
-Data Memory: 1000 data
-Print Function: Connectable to optional external printer EPS-P30
-Auto Hold Fuction: yes
-Calibration History Creation Function: Latest one run
-Interval Measurement: yes
-External Input/Output:
+RS-232C Interface: yes (External Printer)
+USB (peripheral, Micro): yes
-Option Connection:
+External Printer: yes
-Power Source: AA Alkaline battery×4 or USB power feeding (No charging function).
-Power Consumption: Approx.1000 hours (estimated)
-Main Unit Dimensions (Excluding Protruding Parts): Approx.130 W×60 H×230 Dmm
-Main Unit Weight: Approx. 0.7kg
-Inluding:
+ Main unit
+ Sensor Holder: 7430850K
+ Sensor stand (Stand, strut, stopper): 7430860K
+ Tilt stand: 7430870K
+ Sensor attachment (G): 0IB00004
+ Conductivity sensor: CT-58101B
+ Ground wire (2m): X0979500
+ Beakers (150mL): 0DE00001
+ AA Battery (4pcs)
+ Manual
-Tính năng:
+ Màn hình LCD lớn
+ DC (4 AA pin) / Nguồn cấp USB
+ Tuổi thọ pin lên đến 1000 giờ
+ Giao tiếp PC với kết nối USB
+ Bộ nhớ dữ liệu ( lên đến 1.000 dữ liệu)
+ Có thể kết nối với máy in bên ngoài (tùy chọn)
Dải đo:
0-200,0 S / m
0-20,00 MΩ · m
Chloride 0-4,00%
0-100 ° C
Ứng dụng: Thiết bị này dùng để đo pH, độ dẫn điện, điện trở, độ mặn, DO, TDS, nồng độ trong phòng thí nghiệm.
Datasheet
- 良質な取り決め
- オリジナル保証
- 宅配便
- 買い取り簡単化