Tủ thử nhiệt độ và độ ẩm JEIOTECH TH-ICH-300 (300L, -5~85℃, 20~85%)
Hãng sản xuất: JEIOTECH Model: TH-ICH-300 P/N: AAHC1002K - Yêu cầu báo giá
- Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222) 730.39.68
TP. Hải Phòng: (0225) 730.03.89
TP. HCM: (028) 38.119.636
Đồng Nai: 0345.689.536
Dung tích: 300 lít
Điều khiển:Bộ điều khiển PID
Nhiệt độ:
Dải nhiệt độ: -5~85℃
Độ biến động: 0.3℃
Độ biến thiên: ±0.5℃
Độ ẩm:
Dải độ ẩm: 20~85%
Độ biến động: 3%
Độ biến thiên: 5%
Nguồn sáng: Cool White, Ultraviolet, Light uniformity
Thời gian: làm nóng: 25min (20℃ → 85℃)
: làm lạnh: 35min (20℃ → -5℃)
Hệ thống làm lạnh: Air-cooled/ R-404A
: Công suất: 250 W
Vật liệu: Ni-Cr Wire Heater / SUS Tube Heater, SUS # 304, Polyurethane
Cảm biến: Nhiệt độ: Pt100
: Độ ẩm: Electronic sensor
Nhiệt độ hoạt động: 18℃ to 30℃
Thùng chứa nước: dung tích: 15 lit/ pH6.2~7.2
Giao tiêp: Basically RS-232C, [RS-485 : optional]
Cáp nối: Basically one hole provided / Ø 50mm (2"),Optionally max. two holes available / Ø 50 or 80mm (2 or 3.2")
Kích thước: Bên trong: 750×650×650mm
: Bên ngoài: 1130×985×1520mm
Khối lượng: 280±10 kg
Nguồn điện: AC230V, 1ph, 50Hz 14.7 A Cat.No. AAHC1002K
Chi tiết
Temperature & Humidity Control range
- TH-TG (190 to 960L)
- 40~90% RH at 10℃
- 20~95% RH at 30℃
- 10~95% RH at 50~80℃
- 10~80% RH at 90℃
- 40~90% RH at 15℃
- 30~95% RH at 30℃
- 20~95% RH at 50~80℃
- 20~85% RH at 85℃
- 40~80% RH at 15℃
- 30~85% RH at 30℃
- 20~85% RH at 50~85℃
Constructional Features
- High quality #304 stainless steel exterior and interior.
- Casters for easy mobility when installing or moving environmental test chamber.
- Convenient maintenance
- Available to check total operating time. - Unique door lock & trim.
- Vice lock type door and foam silicone packing to ensure a perfect seal.
- Cable port for external probes or wires.
- 50mm diameter cable port comes standard on the left side of the unit. Additional 50mm or 80mm diameter cable ports can be custom ordered. (optional)
- Container type tank for easy adding and changing of water.
- Maintenance of the water tank can be easily performed from the front side. - Door lock.
- Cyclic defrost functions does not affect the temperature and humidity control for extended operation.
(Under 15℃ set value) - Powerful two Sirocco fans maintains a constant airflow in the chamber.
Safety Features
- Leakage breaker for power supply.
- Over current protection.
- Overheat / overcool protection.
- Switch-off after alarm for over heating.
- Water empty alarm.
- Door open alarm.
- Vice lock door type locking mechanism.
Operating Features
- Microprocess PID control / Auto-tuning / Calibration.
- Digital LCD display with touch-sensitive 7 keypads.
- Easy operation with wide LCD screen.
- Temperature and humidity / timer settings and operation condition. - Program patterns are memorized for 10 years due to a battery built into the PCB.
- Expansion parameter inputs. (conveniently display by letters)
- Programming operation.
- Computer interface.
- Software provided.
- Save data in excel format.
- Storage of program information, backup of value settings / recovery, and temperature / humidity values.
- RS-232C port as standard offer. - Chart recorder. (optional)
- 6-point dots type recorder with digital display.
- Digital recorder. (6-channels) - In the event of a validation the apparatus correctly controls each light and then transfers accurate data and is equipped with light sensors. (UV light sensor / VIS light sensor)
- Samples that have to be exposed to the light in which it is completely near the UV energy of less than 200W-hr/m2 is provided to compare directly the results from overall intensity of less than 1.20 million lux-hr, drug substances and reagent.
- Total fluorescent lamp and UV lamp indicator and operating time indicator.
Safety Features
- Leakage breaker for power supply.
- Over current protection.
- Overheat protection.
- Switch-off after alarm for over heating.
- Door open alarm.
- Water empty.
- Vice lock door type locking mechanism. (optional)
- Alarm for completed Photostability Test.
| Model | TH-ICH-300 | TH-ICH-800 | ||
|---|---|---|---|---|
| Chamber Volume (L / cu ft) | 300 / 10.6 | 760 / 26.8 | ||
| Controller | PID control (LCD Type) | |||
| Temperature 1) | Range | without Humidity (℃ /oF) | -5 to 85 / 23 to 185 without Light | |
| 0 to 85 / 32 to 185 with Light | ||||
| with Humidity (℃ / oF) | +15 to 85 / 59 to185 with Light | |||
| Fluctuation 1) (±℃ / oF) at 40℃ / 60%RH | 0.3 / 0.55 | 0.3 / 0.55 | ||
| Variation 1) (±℃ / oF) at 40℃ / 60%RH | 0.5 / 0.9 | 0.7 / 1.3 | ||
| Humidity | Range (%RH) | FULL RANGE : 20 to 85 40 to 80 at 15℃ (59oF) 30 to 85 at 30℃ (86oF) 20 to 85 at 50℃ to 85℃ (122oF to 185oF) |
||
| Fluctuation 2) (±%RH) at 60%RH / 40℃ | 3 | |||
| Variation 2) (±%RH) at 60%RH / 40℃ | 5 | |||
| Light Source (ICH Q1B option 2) |
Cool White 3) | 6,000 lux | 6,500 lux | |
| Ultraviolet-A 3) | 4.5 W/㎡ | 5 W/㎡ | ||
| Light Uniformity | VIS. : ±10% UVA : ±15% | VIS. : ±15% UVA : ±15% | ||
| Typical Time Required to Reach ICH Recommendation of 1.2 million lux-hr | ≒ 200Hr | ≒ 184Hr | ||
| Typical Time Required to Reach ICH Recommendation of 200 W-hr/m2 | ≒ 50Hr | ≒ 40Hr | ||
| Time | Heating 4) | 25min (20℃ → 85℃) | 30min (20℃ → 85℃) | |
| Cooling 4) | 35min (20℃ → -5℃) | 40min (20℃ → -5℃) | ||
| Refrigeration | System | Air - cooled | ||
| Refrigerant | R- 404A | |||
| Capacity (W) | 250 | 470 | ||
| Cooler | Copper plate fin cooler | |||
| Heater | Material | Ni-Cr Wire Heater / SUS Tube Heater | ||
| Drying Bulb (W) | 1500 | 2300 | ||
| Humidity Bulb (W) | 1200 | 2000 | ||
| Sensor | Temperature | Pt 100 | ||
| Humidity | Electronic sensor (Free of drying a wet pack and good response time) | |||
| Air Flow | 2 set of sirocco fan (2×60 W) : Vertical type | |||
| Material | Internal | SUS #304 (2B polish) | ||
| External | SUS #304 (Hairline finish) & Steel, 2t, Double painted & baked | |||
| Insulation | Polyurethane (70mm / 2.76") | |||
| Door | EPDM Sheet | |||
| Operating Temperature | 18℃ to 30℃ / 64.4oF to 56oF, 85%RH (Non-corrosive and pure place) | |||
| Water Tank | Capacity (L / cu ft) | 15 / 0.53 | ||
| Water Quality | pH6.2 ~ 7.2, Electrical conductivity 20㎲ / cm to below | |||
| Interface Port | Basically RS-232C, [RS-485 : optional] | |||
| Cable Port | Basically one hole provided / Ø 50mm (2"),Optionally max. two holes available / Ø 50 or 80mm (2 or 3.2") | |||
| Dimension (W×D×H) |
Internal (mm / inch) | 750×650×650 / 29.5×25.6×25.6 | 750×880×1160 / 29.5×34.6×45.7 | |
| External (mm / inch) | 1130×985×1520 / 44.5×38.8×59.8 | 1220×1215×1965 / 48×47.8×77.4 | ||
| Net Weight (kg / lbs) | 280±10 / 617±22 | 400±10 / 882±22 | ||
| Electrical Requirements | AC230V, 1ph, 60Hz | 15.4 A | 24.5 A | |
| Cat.No. | AAHC1001K | AAHC1011K | ||
| AC230V, 1ph, 50Hz | 14.7 A | 23.5 A | ||
| Cat.No. | AAHC1002K | AAHC1012K | ||
1) All specifications are under ambient temperature 20℃ (68oF), No load.
2) Technical data according to DIN 12880, IEC 60068.
3) The value is measured on the center of chamber at the point of vertical direction.
4) Up to 98% of the set value.
2) Technical data according to DIN 12880, IEC 60068.
3) The value is measured on the center of chamber at the point of vertical direction.
4) Up to 98% of the set value.
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch
