빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
DSO Spec.
Power source: USB bus-power (+5V)
Static power consumption: 0.9W
Max power consumption: <6W
≧12 bits Sampling [Record length]: 200MHz
Input channels: 16
Bandwidth: 40 MHz
Resolution: 12 bits
LA Spec.
Power Source: USB bus-power (+5V)
Static Power Consumption: 0.9W
Max Power Consumption: <6W
Hardware Interface: USB 3.0
Timing Analysis (Asynchronous，Max. Sample Rate): 2 GHz
State Clock Rate (Synchronous，External Clock): 200 MHz
Storage: Conventional Timing, Transitional Timing
Channels: 16
Total Memory: 8Gb
Timing Analysis: Available Chs (Conventional / Transitional Timing) - Memory per Ch
2GHz Timing [Available Chs] - Memory per Ch: [8/7] - 1Gb
1GHz Timing [Available Chs] - Memory per Ch: [16/14] - 512Mb
500MHz Timing [Available Chs] - Memory per Ch: [16/16] - 512Mb
250MHz Timing [Available Chs] - Memory per Ch: [16/16] - 512Mb
Channel to channel skew: < 1ns
Input channels: N/A
Input impedance: 1MΩ//2pF
Max. (Non-destructive): over ±42V DC & AC
Input operation: ±20V / ±10V (Standard / High Resolution)
Input sensitivity: 200MHz (1Vpp)
Threshold group: 2 (CH0~7 & CKI, CH8~15)
Threshold range: ±20V
Threshold resolution: 50mV
Threshold accuracy: ±100mV + 5%*Vth
Trigger resolution: 500ps
Trigger types: Channel, Pattern, Single / Multi Level, Width, Time-out, Setup/Hold Timing Violation, External, Manual
Protocol Trigger:
BiSS-C, CAN2.0B/CAN FD, DALI, DP_Aux, eMMC 4.5, eSPI, HID over I2C, I2C, I2S, LIN2.2, LPC, MDIO, MII, Mini/Micro LED, MIPI I3C 1.1.1, MIPI RFFE 3, MIPI SPMI 2, Modbus, PMBus, Profibus, RGMII, RMII, SD 2.0 (SDIO 2.0), SENT, Serial Flash (SPI NAND), SMBus, SPI, SVI2, SVI3, SVID, UART (RS232), USB PD 3, USB1.1
Protocol Analyzer:
BiSS-C, CAN2.0B/CAN FD, DALI, DP_Aux, eSPI, HID over I2C, I2C, I2S, LIN2.2, MDIO, MII, MIPI I3C 1.1.1, MIPI RFFE 3, Modbus, PMBus, Profibus, PWM, RGMII, RMII, SMBus, SPI, SVI3, SVID, UART (RS232), USB PD 3, USB1.1
