빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Measuring signal and Accuracy (at23℃±5℃):
L: 0.1μH～199.9H ±(0.5％ of rdg＋2digit＋0.2μH) TYP
C: 0.1pF～1999μF ±(0.3％ of rdg＋2digit＋0.2pF) TYP
R: 1mΩ～1999kΩ ±(0.3％ of rdg＋2digit＋2mΩ) TYP
D: 0.001～1.999 ±(0.5％ of rdg＋2digit) TYP
Measuring frequency: 1kHz±5％
Measuring signal level: Accuracy differs according to the range.
L: 10mA～1μA
C: 1V～0.01V
R: 100mA～1μA
Range changeover: Auto or manual
Display: L,C,R 3½ digit, D 3½ digit, LED display
Measurement time: Less than one second to stabilize the measured value
Sampling time: 10 times per second approx.
(Auto range changeover time:1 step 100 msec.)
Changeover of measuring item: L and D, C and D, R are selectable from push-button switch
Measuring mode:
L: Series equivalent circuit
C: 200pF, 2nF, 20nF, 200nF range (parallel equivalent circuit) 2μF, 20μF, 200μF, 2000μF range (series equivalent circuit)
R: Resistance, parallel resistance in series equivalent circuit
Measuring terminal: 5 terminals
Output signal: L, C, R and D, analog voltage output (full scale DC2V)
External bias: 0 to 50V DC, 0.1A max. (capacitance measurement)
Power supply: AC100V～240V selectable, 50/60Hz, about 15VA
Outer dimension: about 333 (W) ×85 (H) ×245 (D) mm (excluding protruding parts such as rubber legs, etc.)
Weight: about 3kg
Comparator unit
Digital comparison method LCR, and D
Judgment error : None
Judgment time: about 1ms (Relay operate time)
Setting range: 1999, D1999 LCR,－NG, with ＋ NG
Display GO / NG: LCR －NG Red LED
＋NG Red LED
D NG Red LED
TOTAL GO Green LED
Buzzer: NG at buzzer, Buzzer GO, No buzzer can be switched
Hold: Possible
Relay output LCR －NG
＋NG
D NG
TOTAL GO
One contact each transfer (Resistance load)
DC 30V 20W
AC110V 33VA
BCD Parallel Data out (Option)
LCR: 1999 3½ digit and blank ; Parallel output fan out 1
D: 1999 3½ digit and D blank ; Parallel output fan out 1
Measurement completes pulse width about 2ms positive pulse ; Parallel output fan out 1
