AE-MIC AE-1154D 저옴 트리밍 미터 (0mΩ~1.5kΩ, 1mA~1A, <9V)

Range: Measuring range/ Resolution/ Current

     1mΩ: 0.0000mΩ~1.5000mΩ/ 0.1μΩ/1A

     10mΩ: 0.000mΩ~15.000mΩ/ 1μΩ/1A

     100mΩ: 0.00mΩ~150.00mΩ/ 10μΩ/ 300mA

     1Ω: 0.0000Ω~1.5000Ω/ 100μΩ/100A

     10Ω: 0.000Ω~15.000Ω/ 1mΩ/ 100A

     100Ω: 0.00Ω~150.00Ω/ 10mΩ/ 10mA

     1kΩ: 0.0000kΩ~1.5000kΩ/ 100mΩ/ 1mA

     %: 0.1mΩ～1.0000kΩ/±50.00%/ 0.01%[10nΩ]/ Mentioned above 

Voltage at terminals open: Below 9V

Measuring method: 4-terminal measurement [contact check is available]

Measuring time: 

      【Free running mode】2～10times/sec.

      【Remote start mode】about 9msec～400msec.

      【Trimming mode】1msec.～100msec.

Comparator setting range: 

     mΩ test mode: 0~15000 [both for low and high limit]

     % test mode: -99.99～+50.00% [both for low and high limit]

Indication of comparator determination result: LO/GO/HI, LED display and buzzer.

Control signal:

    Input: Remote start,

             Remote trimming start,

    Output: Trimming speed mode

         Trimming-NG

         Trimming-End

         Contact-Error

         End of comparison

Operation condition: 【Temp.】5℃~+40℃, 【Humidity】below 85%

Power supply: AC85V~265V,50~60Hz, about 60VA

Outer dimension: 333(W)×99(H)×300(D)mm (excluding protruding parts such as rubber legs, etc.)

Weight: About 3kg 

Option:

- RS-232C/ GP-IB (Only one kind of interface can be provided with the checker.)

- Short termination(Zero ohm standard resistor)

Datasheet