빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Frequency Range (operating, 100 gram payload): 7 Hz to 10 kHz
420 to 600 k cpm
Maximum Amplitude (100 Hz with no payload): 20 g pk (196 m/s2 pk)
Maximum Payload: 750 gram
Sensor Test Method: Automatic Sweep or Manual Operation
Sensor select: Built in transducer library
Calibration Sheets: Automatic Creation to memory
Accuracy
Acceleration (30 Hz to 2 kHz): ±3%
Acceleration (7 Hz to 10 kHz): ±1 dB
Velocity (10 Hz to 1000 Hz): ±3%
Displacement (30 Hz to 150 Hz): ±3%
Amplitude Linearity (100 gram payload, 100 Hz): < 1% up to 10 g pk
Waveform Distortion (100 gram payload, 30 Hz to 2 kHz): < 5% THD (typical) up to 5 g pk
READOUT
Acceleration (peak and RMS): g pk, g RMS, m/s pk, m/s RMS
Velocity (peak and RMS): mm/s pk, mm/s RMS, in/s pk, in/s RMS
Displacement (peak to peak): mils p-p, μm p-p
Frequency: Hz, CPM
INPUT/OUTPUT
Test Sensor Inputs Charge, IEPE, Velocity, Proximity
4-20ma transducer,
4-20ma vibration transmitters
Bias Measurement: Yes
Built in Excitation current and supply voltages for transducers: IEPE Current Source
External Source In (Max): 1V AC RMS
Transducer Simulation Charge, IEPE bias and signal,
4-20ma loop simulator,
Proximity probe driver (axial and radial)
Monitor Reference Out : 10 mv/G (nominal)
POWER
Internal Battery (sealed solid gel lead acid): 12 VDC, 6 amp hours
AC Power (for recharging battery): 110-240 Volts, 50-60 Hz
Operating Battery Life
100 gram payload, 100 Hz 1 g pk: 10 hours
100 gram payload, 100 Hz 10 g pk: 1 hours
PHYSICAL
Sensor Connectors: BNC, DIN, Terminal strip
Weight: 15.2 lb (6.9 kg)
Sensor Mounting Platform Thread Size: 1⁄4-28
Operating Temperature: 0°C-50°C (32°F-122°F)
Dimensions (H x W x D): 8.5 in x 12 in x 10 in (22 cm x 30.5 cm x 28 cm)
Display: 4.3 inch LED
Controls: 2 dials with touch screen
Included:
Power Cable
Short Handle Wrench
Micro Dot (10-32) to BNC Cable
¼-28 Stud
10-32 UNF Stud
2-56 UNC Adapter
6-32 UNC Adapter
10-32 UNF Adapter
Universal Velocity Adapter Disc
Universal Accelerometer Adapter Disc
