Aim TTI AC1000A AC 노이즈 필터 장치 (1kW)

Input Voltage: Factory built to 220V to 240V, 110V to115V or 100V.

Factory configure to 50Hz or 60Hz.

Installation Category II.

Supply Tolerances: Voltage ± 10%. Frequency ± 1%

Output Voltage: Tracks the amplitude of the fundamental of the input

voltage. A variable voltage input may be used to adjust the output voltage to within the limits specified byEN61000–3–2.

Output Distortion: Dependent on the purity of the input but will generally meet the requirements of EN61000–3–2.

Output Current: Maximum continuous output current is 4·4A (10A peak).

Output Power: Maximum output power is input voltage x 4·4 VA

Input Connection: IEC connector; front panel switch.

Output Connection: U.K., Schuko, or other national outlet sockets. Load

power switch can be set to DIRECT or CORRECTED for

‘A–B’ comparisons.

Protection: Thermal trip automatically diverts load to a DIRECT connection in the event of thermal overload.

Operating Range: +5°C to +35°C at full rated output; 20% to 80% RH

(non-condensing).

Storage Range: –40°C to +70°C

Environmental: Indoor use at altitudes to 2000m, Pollution Degree 2.

Safety: Complies with EN61010–1

EMC: Complies with EN31326.

Size: 357 x 132 x 235mm mm (W x H x D)

Weight: 5.5 kg.