Ainuo ANGS045T(F) Programmalbe Grid Simulator (45kVA, 68.2A)

Power Supply Capacity: 45kVA

Input

Voltage: Three-phase four-wire +PE; Phase voltage: 220V±33V, line voltage: 380V±57V

Frequency: 50/60Hz+3Hz

Output

Output Mode: Three-phase four-wire standard mode, three-phase unbalance mode

Voltage, Frequency: Phase voltage: 0.0~300.0V, Frequency: 40.00~70.00Hz

Rated current 220V: 68.2A

Frequency Stability: ≤ 0.02%

Voltage Distortion Degree: Linear load: THD < 1%

Response Time: 1 ms

Three-phase: Three-phase standard mode: 120°±2°

Phase Difference: Three phase unbalance mode: 0.0°- 359.9°, adjustable by 0.1°

Overload Capacity: 

When 105% < Output ≤ 110%, the output will be shut off after 15s

When 110% < Output ≤ 200%, the output will be shut off after 5s

When 200% < Output ≤ 300%, the output will be shut off after 2s

When 300% < Output, the output will be shut off immediately.

Protection Device: IGBT overheating, IGBT overcurrent, transfomer overheating, input overvoltage, input undervoltage, output overvoltage, output undervoltage, output phase loss, output overcurrent, output overload, output short circuit, bus recharge prevention

Function

Display Mode: 8-inch LCD display, resolution: 800*600

Output Waveform: Sine wave, harmonic (2 ~ 50 harmonic superpositions)

Online Regulation Function: Under the conventional mode, the output voltage and the frequency can be adjusted online

Transient Mode: Available. Capable of achieving voltage step (voltage dip) from high voltage to low voltage or from low voltage to high voltage

Programming Mode: 200 steps with 999,999 loops. Voltage, frequency, and phase angle can be programmatically outputted

Startup Slow Rising Time: 0.0-99.9s

Communication Interface: RS232 (standard), RS485 (optional), GPlB (optional), Ethernet (optional)

Environment: Temperature and Humidity: 0~40℃; 20-90%RH

Dimensions (WxHxDmm): 1000x1990x800

Weight (kg): 500

Datasheet