Air Science HLF-36-SS-G Laminar Flow Hood (36")

DIMENSIONS & WEIGHT

Nominal Width: 36" / 914 mm

Internal Height: 22.8" / 579 mm

Internal Depth: 23.75" / 603 mm

External (W x D x H): 37.25" × 29.5" × 42.9" / 946 × 749 × 1091 mm

Net Weight ( lbs/kg): 246 / 112

PRODUCT SPECIFICATIONS:

Filtration:

Airflow : 0.4 m/s (80 fpm).

Pre-Filter : Disposable polyester fibers with 85% arrestance.

Main Filter : ULPA, 99.999% efficient at particle sizes between 0.1 to 0.3 μm.

Clamping : Spring loaded, adjustable tension adjusts for gasket aging.

Construction

Finish (exterior) : White epoxy coated steel frame.

Finish (interior) : Standard models, powder coated interior. -SS models, stainless steel interior.

Windows : Tempered glass, transparant, not available on SS models.

Blower : External rotor motor, permanently lubricated, low noise and vibration levels.

Controls : Main On/Off switch; Solid state fan speed control with RFI filer; UV timer and key switch if included, specify when ordering.

Electrical : 230V, 50Hz voltages available. Specify when ordering. Other voltage options available.

Work Surface : Stainless steel.

GFCI outlet : Standard, 5A maximum.

Monitoring : Minihelic ULPA pressure gauge.

Efficiency

Lighting : LED.

STANDARDS & COMPLIANCE:

Quality Management Systems: ISO 9001 : 2015

Electrical Safety: UL-C-61010-1; CAN/CSA C22.2 61010-1-12; EN 61010-1:2010; CE Mark

OSHA, Occupational Safety and Health Administration: OSHA Standard -29 CFR, Safety and Health Regulations for General Industry, 1910.1450: Occupational exposure to hazardous chemicals in laboratories. Part B, definition, laboratory type hood. This product may assist you with compliance or as part of your chemical hygiene plan. Please consult your Safety Officer and/or Industrial Hygienist.

Environment: ISO 14001: 2015; ENERGY STAR® Partner

Brochure