Amprobe ACD-10 PLUS clamp meter (AC 600A)

Display: 3-3/4 digits 4000 counts LCD display

Update rate: 3 per second nominal

Polarity: Automatic

Operating temperature: °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C

Altitude: Operating below 2000m; Indoor use

Storage temperature: -20 °C to 60 °C, < 80% RH (with battery removed)

Temperature coefficient: nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)

Low battery: Below approx. 2.4V

Power supply: 3V coin battery IEC-CR2032

Power consumption: 2.8 mA typical except that 3.3 mA typical for ACA function

APO timing: Idle for 30 minutes

APO consumption: 5 µA typical

Jaw opening & conductor diameter: max 26 mm

Special features: 30ms Max Hold; Data Hold; Relative Zero mode

Included Accessories:   Test leads, battery (installed), soft carrying pouch, users manual 

Manufacturer: Amprobe

Model: ACD-10 PLUS

Origin: TW

Warranty: 12 months

Display: 3-3/4 digits 4000 counts LCD display

Update rate: 3 per second nominal

Polarity: Automatic

Operating temperature: °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C

Altitude: Operating below 2000m; Indoor use

Storage temperature: -20 °C to 60 °C, < 80% RH (with battery removed)

Temperature coefficient: nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)

Low battery: Below approx. 2.4V

Power supply: 3V coin battery IEC-CR2032

Power consumption: 2.8 mA typical except that 3.3 mA typical for ACA function

APO timing: Idle for 30 minutes

APO consumption: 5 µA typical

Jaw opening & conductor diameter: max 26 mm

Special features: 30ms Max Hold; Data Hold; Relative Zero modepply: Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032