빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Parameter Measured
Particle size distribution: Suspension, emulsion, dry powders
General
Principle: Laser diffraction technologies
Analysis: Mie scattering theory and Fraunhofer diffraction theory
Typical measurement time: Less than 10 seconds
Measurement Performance
Measuring range: 0.02 - 2600 μm (wet)
0.1 - 2600 μm (dry)
Accuracy: <0.5%
Repeatability: <0.5%
Number of size classes: 100 (adjustable)
Feeding mode: Automatic circulation or micro cuvette (wet)/ Gas transportation (dry)
Special functions: SOP settings, refractive index measurement, sample ratio calculation
Main Device
Optical system: Combined Fourier and inverse Fourier & Tilted sample cell
Laser: High-power optical fiber laser (10 mW / 635 nm)
Detector: 92 detectors (forward, lateral and backward arrangements)
Measuring angle: 0.016 - 165°
Wet dispersion module
Measurement method: One-click operation (automated measurement, cleaning, saving, printing, etc.)
Dispersion medium: Water or organic solvents (sample dependent)
Circulation speed: 300 - 2500 r/min
Ultrasonication: Dry burning prevention，50 W
Dry dispersion module
Dispersion medium: Air/ Nitrogen/Noble gas
Air pressure: 0.1 - 0.8 MPa (Air compressor dependent)
Software
Conformity: 21 CFR Part 11, ISO 13320, ISO 13322, USP <429>
Report: Customizable reporting
System Parameters
Dimensions (L x W x H): 70.5 x 31.8 x 29.5 cm
Weight: 23 kg
Supply voltage: 100 - 240V, 50/60 Hz
Computer Configuration (Recommended)
omputer interface: At least one high-speed USB 2.0 or USB 3.0 port required
Operating system: Windows 7 (32 bit and 64 bit) or higher
Hardware specification: Intel Core i5 Processor, 4GB RAM, 250GB HD, Wide screen monitor
