BK Precision 4045B DDS 스위프 함수 발생기 (Arb 기능 포함) (20Mhz,1CH)

Channels: 1
Sine: 0.01 Hz to 20 MHz
Square: 0.01 Hz to 20 MHz
Triangle: 0.01 Hz to 2 MHz
Amplitude Range: 10 mVpp to 10 Vpp (into 50 Ω)
Operating Modes: Continuous, Triggered, Gate, Burst, Trigger Source
Modulation: AM, FM
Input and Output: TTL compatible 
Counter: 50 Hz to 50 MHz
Power: 100 V – 240 V AC
Dimensions: 213 x 88  x  210 m
Included Accessories: Instruction manual on CD, power cord, USB (type A to B), interface cable, certificate of calibration

Model 4045B is a versatile 20 MHz DDS sweep function generator with arbitrary waveform capabilities. The instrument generates sine and square waveforms up to 20 MHz, triangle/ramp waveforms up to 2 MHz, and arbitrary waveforms (12-bit, 50 MSa/s, 1k point) with high signal precision and stability. Providing variable output voltages from 0 to 10 Vpp into 50 ohms (up to 20 Vpp into open circuit), the 4045B also offers linear and logarithmic sweep, AM/FM modulation, and a continuously variable DC offset to inject signals directly into circuits at the correct bias level. 

• Sine, square, triangle, and arbitrary waveform generation
• Bright color LCD display with waveform preview
• Linear and logarithmic sweep
• AM/FM modulation
• Adjustable duty cycle
• Independent DC offset amplifier design allows large offsets on small amplitude (e.g. 10 mV) waveforms
• Low-jitter square wave generation for simulating reliable clock signals, generating triggers, or validating serial data buses
• Store and recall instrument settings
• Output On/Off button
• Internal/external triggering
• Gate and burst mode
• Built-in counter
• USB interface with SCPI-compliant command set
• Short circuit and overvoltage protection on all inputs and outputs
• Datasheet (PDF)
• Hoja de Datos (PDF)
• Manual (PDF)