Why should you avoid buying used hydraulic pumps?

For hydraulic transmission systems, the pump is the key component that determines pressure, flow and overall performance. Many people choose to buy used pumps with the hope of taking advantage of costs, but in reality, the operational risks of used equipment are often much greater when compared to the initial benefits.

No guarantee of operational quality

Mechanical wear changes working parameters

Old hydraulic pumps often have been operating at high pressure for many years. Internal components such as pistons, tilt discs, bearings, seals and vanes are constantly subject to friction, resulting in wear and deviation from design tolerances. When the pump can no longer achieve its rated pressure, the transmission system must compensate for the load, increasing friction, generating heat and consuming energy. Actual efficiency gradually decreases, while the stability of oil flow and output pressure is no longer as good as before.

Affects the entire hydraulic system

The pump is the main power source of the entire system. If the flow or pressure is unstable, the distribution valves, cylinders and hydraulic motors will also operate incorrectly. The system is prone to jerks, oil leaks or sudden pressure drops. Seemingly small errors in the pump can spread to the entire control cluster, reducing the life of the equipment and causing instability in factory operations.

Risks in maintenance and operation

Old pumps are difficult to maintain the tightness and concentricity of the shaft. After each maintenance, the working performance often cannot return to the original state because the assembly tolerance has changed. The need to periodically replace the seal, bearing or piston assembly causes the equipment to be constantly stopped for inspection, directly affecting the production progress.

Hydraulic systems operate at high pressures, sometimes exceeding 200 bar. If the pump leaks or cracks, the pressurized oil can spray out, causing burns or fires. High temperatures from compressed oil and friction between components can pose a fire or explosion risk if not controlled promptly. A system is only safe when the pressure-bearing components are in good technical condition, and this is almost impossible to achieve with equipment that has been used for many years.

To learn more about Hydraulic Pumps, see the following article:

Structure and operating principle of hydraulic pump

New hydraulic pump delivers superior performance and durability

Current hydraulic pump lines are designed with anti-wear alloy materials, optimal pressure regulator assembly and circulating cooling mechanism to maintain stable pressure for a long time.

For example, the EMEADS QQ-700 electric hydraulic pump distributed at emin.vn uses a high-power motor, precision transmission system and automatic overload protection mechanism. The pump operates smoothly, has stable flow, reduces oil loss and limits heat generation during operation.

Conclude:

In short, the hydraulic pump is the center of energy transmission of the entire system. A used device cannot maintain the same tightness, precision and load capacity as a new device. Choosing a new and genuine pump helps the system operate stably, maintain high performance and ensure safety for the operator. Refer to the types of hydraulic pumps at: EMIN hydraulic pump

관련 뉴스

2026년 10월 15일 16시 12분 33초

Toxic Gas Traps in Sewers & Tanks and The 3-Minute Rule

Confined space environments frequently accumulate hazardous gases originating from organic decomposition or long-term chemical reactions. Therefore, strictly adhering to the minimum 3-minute air testing procedure using a Portable Gas Detector is considered a mandatory safety requirement to protect workers' lives.

2026년 10월 15일 15시 27분 19초

Why Can a Magnetic Stirrer Maintain a Low Speed of 30 RPM Without Jerking?

Deciphering motor mechanics, PID closed-loop control, and magnetic-coupling physics for suspended cell samples and shear-sensitive solutions.

2026년 10월 15일 15시 14분 42초

Save 50% on Multiparameter Water Tester Sensor Replacement Costs

By mastering degradation mechanisms and implementing proper maintenance techniques, technicians can fully restore electrode sensitivity, ensuring stable equipment operation and significantly extending replacement cycles.

2026년 10월 15일 14시 32분 42초

Upgrading Laboratory Heating Magnetic Stirrers: Temperature Precision, Heating Plate Materials, and Cleanroom Safety Standards

Many laboratories still rely on older-generation hotplates equipped with mechanical control knobs, the markings on which have long since faded. Technicians are often forced to stand by and constantly monitor temperatures; samples are frequently prone to localized overheating which compromises the accuracy of analytical results while the risk of spilled solvents seeping into the control circuitry poses a constant threat of equipment failure. In recent years, there have been significant advancements in microprocessor technology, heating plate materials, and magnetic stirring systems. This article addresses all technical questions to consider when evaluating the replacement of such equipment

2026년 10월 15일 13시 53분 21초

Why Is Power Integrity More Than Decoupling Capacitors?

Power integrity requires more than applying simple decoupling-capacitor rules of thumb. As IC processes reach gigahertz levels, lower-speed circuitry also needs more careful consideration.