CEM EVSE-200 EVSE 어댑터

Input: Max.250V (single -phase system)/max.430V (three -phase system).50 /60HZ,MAX 10

EVC -200 -Connector: AC charging mode 3

EVC -100 -Connector: AC charging mode 3

Dimensions(B*H*L): 235*60*60mm (length without connecting cable)

Weight: 832g (Weight without connecting cable)

IP protection: IP54

Safety: IEC/EN 61010-1 IEC61010-2

Overvoltage category: CAT II 300V

Pollution degree: 2

Protection classification: double insulation

Altitude: Max 2000 meters above sea level

Working temperature range: 0-40°C

Maximum relative humidity: 95 %RH (0-40°C), non-condensing

Storage temperature range: -10-50°C

Maximum relative humidity:  90 %RH (-10-40°C) 80 %RH (40-60°C)

PE pre-test: yes

PP simulation

        open (Error condition or disconnection of plug)

        13A; 20A Coding for maximum current of the EV cable.

        32A; 63A EVSE is connected and can operate in any of these coding position.

CP simulation 

        states A (EV disconnected)

        states B (EV connected)

        states C (EV charged without ventilation)

        states D (EV charged with ventilation)

CP error“E”: on (CP short to PE via diode)/off

PE error: on (PE error)/off