Chauvin Arnoux C.A 5005 + 미니 램프 MN 89아날로그 멀티 미터 (kèm kìm AC)

- DC voltage : 8 ranges: 100 mV /.. / 1,000 V 
- AC voltage : 5 ranges: 10 V /.. / 1,000 V 
- Internal resistance : 20 kΩ/V
- Working frequency : 10 Hz ...100 kHz depending on range
- DC current  : 6 ranges: 50 μA /.. / 10 A
- AC current  : 5 ranges: 3 A /.. / 300 A
- Typical accuracy : 1.5 % on V .  2.5 % on V~and A .  10 % on Ω
- Power supply: 9 V battery
- Battery life: 10,000 measurements of 10 s 
- Electrical safety : IEC / EN 61010-1 Edition 2 • 600 V Cat III-2
- Protection : HRC fuses: 1 A and 10 A
- Degree of watertightness: IP 53
- Environmental conditions: -10 °C ... +55 °C and RH < 90 %
- Dimensions / Weight: 160 x 105 x 56 mm / 500 g

State of delivery:  IEC 1010 safety leads with test probes, battery and user manual.
Accessories: 
- Shoulder bag (240 x 230 x 70 mm)  P01298033
- Carrying holster (220 x 180 x 75 mm)  P01298036
- Carrying case (270 x 200 x 65 mm)  with precut foam insert:
+ for the C.A 5001 or C.A 5003  P01298037 
+ for the C.A 5005 and MN 89   P01298037A

datasheet
user guider

Description

The C.A 5005 is a very competitively-priced analogue multimeter designed to meet all the needs of electricians.

It is delivered with a current clamp allowing measurement (with direct readings) of AC currents up to 200 A AC.

Specifications:

• DC voltage: 100 mV to 600 V (8 ranges)
• AC voltage: 10 V to 600  V (5 ranges)
• DC current: 50 µA to 10 A (6 ranges)
• AC current: 3 A to 240 A (5 ranges) with MN89 clamp supplied
• Automatic calibration
• “Voltest” LED if voltage present in ohmmeter mode
• Typical accuracy: 1.5%
• Impedance: 20 kΩ/V
• Resistance: 10 kΩ and 1 MΩ
• Audible continuity test: R < 50 Ω
• dB scale (AC voltages)
• Fuse status LED
• Dimensions: 160 x 105 x 56 mm
• Weight: 500 g
• IP53
• Use on any installation rated lower than or equal to CAT III 600 V as per IEC/EN 61010-1 Edition 2