DET RD-30 킬로 볼트미터 (30KV)

RD-30 provides a measurement of:

- RMS value of the AC voltage of 50 Hz.

- DC voltage average value.

RD-30 can be used to test high-voltage laboratories of electrical and energy profile, as well as scientific research, institutions.

Ripple DC voltage must not exceed 1%.

The distance from high-voltage inputs of RD-30 to power object not less than 0.5 m.

Interconnection between 2 units (high-voltage unit and metering unit) is wireless.

Measuring range DC voltage (average): 1 to 30 kV.

Measuring range of the AC voltage (RMS) from 1 to 30 kV.

Bandwidth: 0-500 Hz.

Input impedance of high-voltage unit RD-30 on DC 60 ± 2 MOhms.

Input impedance of high-voltage unit RD-30 on AC, 50 Hz: 50 ± 5 MOhms.

Maximum permissible relative error of DC and AC measurement: ± 1,0%.

Power supply of HV unit and remote control unit: 4xNi-MH batteries AA of 1.2 V and a capacity of 1.8-2.1 A • h:

Supply voltage: 5 ± 0,2V.

Continuous operation without recharging: at least 8 hours.

Radiochannel range: at least 5m.

Continuous operation of RD-30 with an input voltage up to 30 kV: up to 8 hours.

Operation mode setup time after the power:1 minute.

Dimensions:

RD30-HV: 250x200x150 mm;

RD30-RC: 95x190x40 mm.

Weight:

RD30-HV: max 1 kg.

RD30-RC: max 0.5 kg.