DGBell BTL-D2-252C 더블 데크 고온 및 저온 테스트 챔버 (-40 ℃~150 ℃)

Single Cabinet Inner Dimension: W600 X D700 X H600 MM

External Dimension: W1300 X D1800 X H1950 MM

Structure Mode: An integral structure with upper and lower cabinets.

Temperature Range: -40℃ — +150℃

Temperature Fluctuation: ±0.3℃

Heating Rate: Average 1~3°C/minute (non-linear no-load)

Cooling Rate: Average 1.0°C/min Full rang (non-linear no-load)

Temperature Uniformity: ≤±2℃(at no load, constant state)

Observation Window: Three-layer vacuum tempered glass

Test Terminal: 12 sets of terminals are connected to the test cabinet inside and outside of the chamber

Cooling Mode: Air cooling / Water cooling (Optional)

Compressor: Tecumseh (France)

Controlling Mode: Touch screen programmable control PLC, with USB interface, with RS485 .interface can be connected to computer control, special network control software, convenient remote monitoring, data acquisition

Internal Chamber Material: 1.0MM thick SUS304# stainless steel with mirror finish, sprayed with Teflon insulation

External Chamber Material: 1.2 MM thick Galvanized sheet, dusting pained with high temperature plasticized coating.

Power Supply: AC380V 50HZ   12KW

Safety Protection: Automatic explosion-proof pressure relief device, explosion-proof chain, tri-color light alarm device, remote control, smoke exhaust device, fire extinguishing device, etc.

Extension Function: Provide communication protocol, able to accompanied use with charge and discharge machine

datasheet