DMC Tools MPT-250C Motorized Wire Crimp Pull Tester (2.5 – 250.0 lbf)

Test Types : 2 test types – “Pull to Fail” and “Force Hold”

Data Capture : Measures continuous and peak force holds

User Interface : Intuitive full-color touchscreen LCD

Force Measurement Range : 2.5 – 250.0 lbf (113 kgf or 1112.0 N)

Force Measurement Resolution : 0.1 (lbf, kgf, N)

Force Measurement Accuracy : ±0.5% Full Scale

Force Readout : Pounds Force, Newtons, Kilograms Force (lbf, N, kgf)

Pull Rate Speeds : 1 to 10 inches per minute (in/min)

Pull Rate / Speed Accuracy : 1–5 ±0.125 in/min; 6–10 ±0.250 in/min

Pull to Fail – Test Force Range : 2.5 – 250 lbf

Force Hold – Test Force Range : 5 – 100 lbf

Force Hold – Test Force Hold Accuracy : -2.3 to +2.3 lbs for force < 30 lbs; -4.5 to +3.3 lbs for force ≥ 30 lbs

Wire Compatibility : Accommodates most 10 AWG – 26 AWG wire

Communication Ports : Serial RS-232 (DB9 female connector), USB 2.0

Power Requirements : IEC Connector, 100 – 240 VAC, 50/60 Hz, 25 W maximum (International Power Cords Available)

External Fuse Type and Rating : Type 3AG (6.3 x 32 mm), 1 A time delay, 250 VAC

Physical

Shipping Weight : ≈40.6 lbs (with typical / standard grips)

Case Weight : 16.12 lbs

Base Dimensions : 13.3" W x 6" H x 11" D