Dynaflox DMTFB 초음파 전달하 시간 교류 미터 | EMIN.VN

Dynaflox DMTFB 초음파 전달하 시간 교류 미터

Name: Dynaflox DMTFB 초음파 전달하 시간 교류 미터
Brand: Dynaflox
Price: 56603000 VND
Availability: OutOfStock

재고 있음: 0 개

제조사Dynaflox

ModelDMTFB

부가세 별도

56,603,000 VND

부가세 포함

61,131,240 VND

수량

안전한 결제

품질 보장

간편 교환 및 반품

배송 가능

Transmitter
Power Supply: standard 115/230VAC 50/60Hz, 5 VA max
Velocity: -40 ~ +40 ft/s (-12 ~+12m/s)
Display: LCD 4x16
Units Rate Totalized: User Configured (English and Metric);
Output: 4~20 mA, pulse, relay, RS232; options: up to 8 GB Data logger
Accuracy: ±1.0% of reading at rates >0.5 m/s
±2.0 % of reading at rates <0.5 m="" s="" br=""> Sensitivity: Flow Rate: 0.001ft/s (0.0003m/s)
Repeatability: 0.2% of reading
Security Keypad lockout, access code enable
Dimensions and Weight: 260 x 193 x 80 mm Weight: <2.5kg

Transducer
Liquid Types Supported: Virtually most any liquid containing less than 2% total suspended solids (TSS) or aeration
Suited Liquid Temperature
Std. Temp.: -40℃~121℃
High Temp.: -40℃~250℃
Pipe Size option:
Std M transducer: DN40-1000 (40-1000mm)
L transducer: DN1000-4500 (1000-4500mm)
S transducer: DN15-50 (15-50mm)
K type transducer: DN15-50 (15-50mm)
Dimensions and Weight:
S: Size:42*25*25; weight:<0.2kg
M: Size:60*43*43; weight:<0.5kg
L: Size:80*53*53; weight:<1.0kg

Datasheet

Option transmitter:

Option Tranduser:

Option K-mode Small-Pipe Round Clamp-on Transducer P

Series DMTFB wall-mount Clamp-on Transit Time Ultrasonic Flow Meters

Features

1. Due to the non-invasive nature of the clamp-on technology, there is no pressure drop, no moving parts, no leakage, no risk of contamination and corrosion.

2. Measurement is independent of fluid conductivity with wider applications than magnetic meters.

3. Non-invasive, NEMA 4X (IP65) clamp-on transducer is easy to install and cost efficient. Since the transducers do not contact with the liquid, fouling and maintenance are eliminated.

4. Parallel operation of positive, negative and net flow totalizers with multiplier, while the output of totalizer pulse or flow rate frequency output are transmitted via open collector terminal.

5. Standard type and Explosion-Proof ATEX(ExdIIBT6; LCIE 09 ATEX 3008) type are available, with wide operating temperature range : -40â„ƒ~250â„ƒ.

6. Wide range of pipe sizes from DN15 to 4500.

7. Clamp-on transducers require no pipe cutting or processing interrupted.

8. Wide bi-directional flow range of -40 to 40 ft/s (-12 to 12 m/s).

9. Up to 8GB SD card data logger can memory flow rate, total flow, velocity and time. Time interval can be freely setup by user.

Note: K mode transducers utilize the Round-Clamp method, and the transducers transmitting and receiving sides are connected with the pipe surface thoroughly to acquire enough coupling area, better reliability, stability, etc.