빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Display
Display Type: 7" high brightness LCD
Touch Screen: Yes
Display Brightness: 1000 nits, variable from 0% to 100%
Display Update Rate: 60 Hz
HDMI video output: Yes ( HDMI supported resolution for Monitor (1024X768, freq: 60Hz))
Range: 2 to 15,000 mm, in 0.1 mm steps
Velocity: 250 to 16,000 m/s, in 1 m/s steps
Zero Offset: 0 to 1000 µs, in 0.01 µs steps
Display Delay: -60 to 15,000 mm, in 0.1 mm steps
Units: millimeters, inches, µs, %
Rectification: Full wave, positive half-wave, negative half-wave
Horizontal Grid: 100% or 110%
Reject: 0% to 99% FSH with visual indication
Skip Distance: Visual indications based on thickness and angle
A-Scan: Active freeze, freeze, lled
Real Time Clock: Date and time for saved records
Data acquisition
Digitizing Frequency: 100 MHZ
Data Storage: 32 GB SD card
Single A-Scan Storage: > 6 million A-Scans
Report Generation: On-board PDF report with custom logo, PNG A-Scan
Continuous A-Scan Recording*: onboard le generation, > 200 hours
Calibration Sets: 10,000 calsets
Data Export: SD card, USB ash drive, PC connection
Receiver
Dynamic Range: 0 to 120 dB, in 0.1 dB steps
Receiver Bandwidth: 0.5 to 20 MHZ wide band amplier
Digital Filter Settings: 0 to 20 MHz, in 0.1 MHZ steps
Enhance Mode: Off, low, mid, high
System Linearity
Horizontal: ± 1% FSW
Vertical: ± 2% FSH
Gates
Measurement Gates: 3 gates + 1 interface gate*
Measurement Mode: Max peak, flank, j-flank, first peak, zero crossing
Start: 0 to 20,000 mm, in 0.1 mm steps
Width: 0 to 20,000 mm, in 0.1 mm steps
Threshold: 0% to 100%, in 0.1% steps
ToF Resolution: Selectable 1/0.1/0.01 mm
Alarms: Positive and negative threshold, wall thickness
Alarm Indication: Audio and visual indicators with vibration
Gate Width Zoom: For gates 1, 2, 3
Amplitude Measurement: 0% to 110% FSH, with 0.1% resolution
Measurement Rate
Equivalent to PRF
Automated Calibration
• Velocity, Zero Offset
• Straight Beam (first back wall or echo-to-echo)
• Angle Beam (Soundpath or Depth)
Pulser
Pulser Types
• Square wave
• Spike
PRF: 10 to 2000 Hz, in 1 Hz steps
Voltage: 50V - 450V, in 25V steps
Pulser
Pulse Width: 0.5 - 20 MHz, in 0.1 MHZ steps
Damping: 50 Ω, 400 Ω
Impulse Mode: 0 to 7
Test modes: Pulse echo, dual, through transmission
Instrument Inputs/Outputs
USB Ports: USB C - charging, storage access USB A - ash drive
Transducer connections: LEMO 00
SD Card: 32 GB
Environmental Ratings
IP Rating: IP 65
Operating Temperature: -10° C to 55° C
Storage Temperature :-20° C to 60° C
Battery Recharge Temperature: 0° C to 40° C
Measurements
Measurement Display Locations: 12 user defined blocks
Trigonometric: Beam path, flaw depth, surface distance, min/max depth, gate2- gate1
Threshold: Echo height in %, attenuation in dB, min/max threshold
Trigger: Initial pulse, IF gate
Job Thickness:0.1 to 999.9 mm, in 0.1 mm steps
Refracted Angle: 0° to 90°, in 0.1° steps
DAC: Point-point and parabolic curve, 2 additional curves with ±20 dB offset, up to 15 point curve
TCG: 15 point, 18 dB/10 ns slope
Curved Surface Correction: Tube, bar
AWS: D1.1/D1.5
DGS:
Universal DGS*
FlexiDGS
General
Overall dimensions (W x H x D): 205 mm x 130 mm x 60 mm
Construction: IP 65 Compact, Rugged Molded ABS, Soft Touch
Weight With Battery: 1 kg
Operation: 5 button navigation Keypad + 1 gain key, ambidextrous operation
Battery Type: Single rechargeable inbuilt lithium-ion 7.4v 40W
Battery Life: Upto 8 hrs
Power Requirements: USB C fast charger, 100 - 240 VAC, 50-60 Hz, 1.5 A
