빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Applications
Geotechnical soil research
Trafficability or load bearing capacity research (e.g., construction sites)
Checking artificial compaction of the soil
Research the growing conditions of plants in the soil
Tracing compacted layers in the soil (plow sole)
Specifications
Angle of cone: 60°
Cone surface range: 1, 2, 3.3, 5 cm²
Connection: Screw thread
Maximum force: 10000 @ 1 cm² kPa
Measured parameters: Penetration resistance
Measuring accuracy: < +/- 8%
Measuring range: 0...10000 kPa
Product material: Stainless steel, iron, other material
Reading accuracy: 1%
Registration type: Manual
Description
With the hand penetrometer you can easily and quickly measure the resistance of the ground using your own body weight. Simply push the hand penetrometer evenly into the soil to take the measurement. The resistance measured at the cone can be read from the pressure gauge, which indicates it with a red pointer.
The actual resistance to penetration (kPa/cm²) of the soil can be determined by dividing the reading value by the surface of the cone. The size of the to be used cone is depends on the hardness of the soil: the harder the soil, the smaller the cone. However, the larger the cone, the more accurate the measurement will be. The hand penetrometer is suitable for several applications.
Available variations
06.01.SA Range 1 metres
06.01.SB Range 3 metres
Set contains
Measuring device
2 sets of probe rods
4 types of cones; 1, 2 3 1/3 & 5 cm², angle 60°
Inspection jig for cones
Maintenance kit
Transport case
Manual
