Eijkelkamp 11.03.43 수위계 (50 m)

Applications

Water level measurements of electrically conducting liquids in boreholes, wells and tanks (in ATEX-free zones only) 

Long-term observations for periodic level soundings 

Continuous water level registration during pumping tests 

Additional sounding of well depths using the bottom sensor (accessory) 

Geohydrological research 

Water quantity research 

Specifications

Range: 50m

Diameter (D) and/or size (L*W*H): Sensor D 15 mm, L 195 mm

Measured parameters: Level

Measuring principles: Conductivity

Power supply: Battery, 4x1.5 volt DC (AA) with 2 years lifetime

Product material: Stainless steel and electroplated brass (easy to clean)

Safety class for probe: IP 68, permanently pressure resistant

Safety class measuring tape: IP 64, spray water resistant

Reading accuracy: 1 cm

Registration type: Manual

Recommended storage temperature: +5°C up to +30°C, for battery protection

Package size: 34x22x23 or 39x35x35 cm

Weight: 2.1 or 3 or 5 kg

Description

The water level meter is part of the standard equipment for measuring the groundwater level. It is provided with a stainless steel probe, which is connected to a measuring tape with centimetre graduation. This compact version is characterised by its robust design and favourable price. Its low weight and slim design make it easy to transport.

When the probe touches a conductive liquid, it will emit a clear acoustic and light signal. Once the cable is then slightly lifted, the signal will stop and the depth reading can be done directly from the measuring tape (accuracy: ± 1 centimetre).

Brochure:

Manual: