빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Applications
Water level measurements of electrically conducting liquids in boreholes, wells and tanks (in ATEX-free zones only)
Long-term observations for periodic level soundings
Continuous water level registration during pumping tests
Additional sounding of well depths using the bottom sensor (accessory)
Geohydrological research
Water quantity research
Specifications
Range: 100m
Diameter (D) and /or size (L*W*H): Sensor D 15 mm, L 195 mm
Measured parameters: Level
Measuring principles: Conductivity
Power supply: Battery, 4x 1.5 volt DC (AA) with 2 years lifetime
Product material: Stainless steel and electroplated brass (easy to clean)
Safety class for probe: IP 68, permanently pressure resistant
Safety class measuring tape: IP 64, spray water resistant
Reading accuracy: 1 cm
Registration type: Manual
Recommended storage temperature:+5°C up to +30°C, for battery protection
Description
The water level meter is part of the standard equipment for measuring the groundwater level. This model has a strong and robust frame, but is still easy to carry. The probe is made of stainless steel and is connected to a long measuring tape with centimetre graduations, for easy read-out of the levels.
The probe gives a sound and light signal when it touches a conductive liquid. If the cable is then lifted slightly, the signal stops and the depth can be read directly from the measuring tape (accuracy: ± 1 centimetre). Royal Eijkelkamp's Water level meter is available in various lengths.
Brochure:
