빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Fit for silt loaden water: Yes
International Protection Rating: IP66
Maximum pumping capacity: 2l/min
Maximum sample depth: 9m
Power supply: Battery
Voltage: 12V
Product material: Stainless steel, PTFE
Sample diameter: 4mm
Flux : 2l/min
Package size: 46 x 26 x 37 cm
Weight: 8.5kg
Application
Environmental soil research
Monitoring well installation
Water quality research
Monitoring water quality
Anaerobe sampling
Water sampling
Ground water sampling
Description
With the 12 VDC Advanced peristaltic pump, water can be pumped from a depth of up to 9 metres. This peristaltic pump is suitable for sampling and purging of monitoring wells for several hours continuously with the low-flow pumping method. By using the filter holder or 0.45 micron disposable filters for removal of soil particles from water samples, in-line filtration for sampling of groundwater can be done.
Connect the impeller pumps (art. 12.12.SA) to the peristaltic pump and you will able to pump large quantities of water out of monitoring wells, for instance during well development after they have just been placed.
Product details
This peristaltic pump is controlled by a microprocessor which provides adjustable constant speed, overload protection and various external control functions. A built-in maintenance-free 12 Volt lithium-ion battery (10 Ah) makes it possible to use the pump in the field, for two to five hours at a time (depending on the load). Use more than one peristaltic pump to save time. The housing is the highest degree splash-proof (IP 66) and can function safely and without problems in the field.
Manual
Handleiding
