Model & Part Number

CG70BDL

CG70ABDL

Material thickness digits display

■

■

B-Scan cross sectional display

■

■

Combined B-Scan and digits display

■

■

Scan bar display

■

■

A-Scan display

 + Rectified, - Rectified, Full Waveform (RF)

Measurement Mode

PE & EE (ThruPaint™)

 PE & EE (ThruPaint™)

Measurement Rate
Manual:
Scan mode
Scan bar display

4 readings per second
32 readings per second
6 readings per second

4 readings per second
32 readings per second
6 readings per second

Measuring Range¹

PE: 0.63 - 254mm (0.025 - 9.999 inches)
EE: 1.27 - 102mm (0.05 - 4.00 inches)

PE: 0.63 - 254mm (0.025 - 9.999 inches)
EE: 2.54 - 102mm (0.100 - 4.00 inches)

Measurement Accuracy¹

± 1% or ±0.1mm whichever is the greater

± 1% or ±0.1mm whichever is the greater

Measurement Resolution

0.01mm (0.001 inches)

0.01mm (0.001 inches)

Velocity Calibration Range

1250 - 9,999m/s (0.0492 - 0.3937in/μs)

1250 - 10,000m/s (0.0492 - 0.3936in/µs) 

    High speed scan mode

■

■

    Differential mode

■

■

    Limit alarm mode

■

■

    B-Scan display speed

15 seconds per screen

15 seconds per screen 

    Flaw mode

  Basic prove-up flaw detection using
single element angle beam transducers

    Calibration setups

6 factory & 64 user-definable setups
transferrable to and from a PC archive

6 factory & 64 user-definable setups
transferrable to and from a PC archive

    Gates

• PE: 1 gate; EE: 2 gates, 1 gate with hold off
• Adjustable threshold

Pulser type

Square wave pulser

Square wave pulser with adjustable
pulse width (spike, thin, wide) 

Gain

PE: selectable low, medium or high gain
EE: automatic gain control (AGC)

 Manual or automatic gain control (AGC) with
40dB range (depending on mode selected)

Timing

20MHz with ultra low power 8 bit digitizer

20MHz with ultra low power 8 bit digitizer 

Data logging

• 12,000 readings with waveform
• Sequential and grid logging
• Alpha numeric batch identifaction
• OBSTRUCT indicates inaccessible locations

• 12,000 readings with waveform
• Sequential and grid logging
• Alpha numeric batch identifaction
• OBSTRUCT indicates inaccessible locations 

Calibration Options

Single, two point, velocity & material type

Single, two point, velocity & material type 

Transducer Probe Type

Dual element

Dual element 

Transducer Frequency Range

1 - 10MHz

1 - 10MHz 

Transducer recognition

Manual - selectable from a list

Manual - selectable from a list 

V-path / dual path error correction

Automatic

Automatic 

Probe zero

Manual (via integrated probe disk)

Manual (via integrated probe disk) 

Display

1/8" VGA (greyscale)
62 x 45.7mm (2.4 x 1.8 inch) viewable area

1/8" VGA (greyscale)
62 x 45.7mm (2.4 x 1.8 inch) viewable area 

Units (selectable)

mm or inches

mm or inches 

LED Backlight

on / off / auto

on / off / auto 

Repeatability / Stability Indicator

■

■

Battery Type

3 x AA alkaline

3 x AA alkaline 

Battery Life (approximate)

200 hours

200 hours 

Low Battery Indicator

■

■

Battery Save Mode

Auto

Auto 

Operating Temperature

-10 to 60ºC (14 to 140ºF)

-10 to 60ºC (14 to 140ºF) 

Size (w x h x d)

63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches)

63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches) 

Weight (including batteries)

383g (13.5oz)

383g (13.5oz) 

Aluminium case design with gasket sealed end caps,

waterproof membrane keypad

■

■

Transducer Connector Type

LEMO

LEMO 

RS232 Interface

Bi-directional

Bi-directional