Elcometer PG70ABDL 정밀 두께 게이지 (0.15 ~ 254mm, IP54, 데이터 로깅, RS232, A 스캔, B 스캔) | EMIN.VN

Elcometer PG70ABDL 정밀 두께 게이지 (0.15 ~ 254mm, IP54, 데이터 로깅, RS232, A 스캔, B 스캔)

Name: Elcometer PG70ABDL 정밀 두께 게이지 (0.15 ~ 254mm, IP54, 데이터 로깅, RS232, A 스캔, B 스캔)
Brand: ELCOMETER

제조사ELCOMETER(이 브랜드의 다른 제품 보기)

ModelPG70ABDL

문의하기

수량

안전한 결제

품질 보장

간편 교환 및 반품

배송 가능

Tough, impact, waterproof and dust resistant equivalent to IP54
Measurement Mode: PE, IE & EE
Measurement Rate:
+ 4 readings per second
+ 32 readings per second
+ 6 readings per second
Thickness Range:
+ PE (contact) on steel: 1.000 - 254mm (0.040 - 10.000 inches)
+ PE (contact) on plastic: from 0.254mm (0.010 inches)
+ IE on steel: 1.27 - 25.4mm (0.050 - 1.000 inch)
+ IE on plastic: from 0.127mm (0.005 inches)
+ EE (contact) on steel: 2.54 - 76.20mm (0.100 - 3.000 inches) -
+ EE on steel: 0.15 - 12.70mm (0.006 - 0.500 inches)
Measurement Accuracy: ±1% or ±0.02mm
Measurement Units: mm or inches
Selectable Reading Resolution: 0.01mm / 0.001mm
Calibration Options: Single, two point, velocity & material type
Datalogging: 2,000 readings
RS232 Interface: Bi-directional
Battery Type: 3 x AA alkaline
Battery Life (approximate): 150 hours
Operating Temperature: -10 to 60ºC (14 to 140ºF)
Size (w x h x d): 63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches)
Weight (including batteries): 383g (13.5oz)
RS232 Interface: Bi-directional
Packing List: Elcometer NDT PG70ABDL precision gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, software, transfer cable

Note: A transducer is not suppied with the Gauges, must be ordered separately

Manual

Datasheet

Datasheet Transducer

PG70ABDL Precision Thickness Gauge

With a user selectable resolution of either 0.01mm or 0.001mm (0.001/0.0001) the PG70ABDL precision thickness gauge can display the thickness value together with A and B-Scan displays, providing users with the ability to accurately assess a wide range of materials.

The auto find feature locates the detection point(s) and adjusts the display settings to bring the waveform into view.

The high speed scan feature on the PG70ABDL precision thickness gauge speeds up the inspection process by taking 32 measurements per second. Remove the transducer from the test material and display the minimum measurement scanned.

Visual and audible alarm with high and low limit settings for specific application tolerances.

Features:

0.001mm high resolution
Range of display options: A-Scan, B-Scan, Pulse-Echo, Echo-Echo
Adjustable gain: -30dB to 70dB range
Automatic gain control (AGC)
User definable setups
Multiple language display
Multiple calibration and material selection options
High speed scan: 32 readings per second
Differential mode
Minimal thickness alarm
Data output and storage: 12,000 readings and waveforms
Data management software

Pulsed Echo (P-E) Measurement Mode Interface Echo (I-E) Measurement Mode Echo Echo (E-E) Measurement Mode B-Scan Display Mode A-Scan Display Mode

PG70ABDL Precision Thickness Gauge

Technical Specification

Model & Part Number	PG70ABDL
Material thickness digits display	■
B-Scan cross sectional display	■
Combined B-Scan and digits display	■
Scan bar display	■
A-Scan display	+ Rectified, - Rectified, Full Waveform (RF)
Measurement Mode	PE, IE & EE (ThruPaint™)
Measurement Rate: Manual Scan mode Scan bar display	4 readings per second 32 readings per second 6 readings per second
Measuring Range	PE (contact) on steel: 1.000 - 254mm (0.040 - 10.000 inches) PE (contact) on plastic: from 0.254mm (0.010 inches) IE on steel: 1.27 - 25.4mm (0.050 - 1.000 inch) IE on plastic: from 0.127mm (0.005 inches) EE (contact) on steel: 2.54 - 76.20mm (0.100 - 3.000 inches) - ThruPaint™ EE on steel: 0.15 - 12.70mm (0.006 - 0.500 inches)
Measurement Accuracy	±1% or ±0.02mm whichever is the greater
Measurement Resolution	User selectable: 0.01mm / 0.001mm (0.001 / 0.0001 inch)
Velocity Calibration Range	1250 - 10,000m/s (0.0492 - 0.3936in/ms)
High speed scan mode	■
Differential mode	■
Limit alarm mode	■
Selectable resolution	■
B-Scan display speed	15 seconds per screen
Calibration setups	16 factory & 48 user-definable setups transferrable to and from a PC archive
Gates	• PE: 1 gate; IE, Plastic & EE: 1 gate with hold off • Adjustable threshold
Pulser type	Square wave pulser with adjustable pulse width (spike, thin, wide)
Gain	Manual or automatic gain control (AGC) with 40dB range (depending on mode selected)
Timing	40MHz with ultra low power 8 bit digitizer
Data logging	• 12,000 readings with waveforms • Grid logging • Alpha Numeric batch identification • OBSTRUCT indicates inaccessible locations
Calibration Options	Single, two point, velocity & material type
Transducer Probe Type	Single element with delay tip, pencil with delay tip & contact probes
Transducer Frequency Range	1 - 20MHz
Transducer recognition	Manual - selectable from a list
V-path / dual path error correction	Automatic
Probe zero	Manual (via integrated probe disk)
Display	1/8" VGA (grayscale), 62 x 45.7mm (2.4 x 1.8inch) viewable area
Units (selectable)	mm or inches
LED Backlight	on / off / auto
Repeatability / Stability Indicator	■
Battery Type	3 x AA alkaline
Battery Life (approximate)	150 hours
Low Battery Indicator	■
Battery Save Mode	auto
Operating Temperature	-10 to 60ºC (14 to 140ºF)
Size (w x h x d)	63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches)
Weight (including batteries)	383g (13.5oz)
Aluminium case design with gasket sealed end caps, waterproof membrane keypad	■
Transducer Connector Type	LEMO
RS232 Interface	Bi-directional
Packing List	Elcometer NDT PG70ABDL precision gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, software, transfer cable