Electric Safety Testing Reference Guide

Metal detectors operate on the principle of passive electromagnetic induction and can only detect isolated metal objects such as gold, copper, and iron. These devices cannot trace utility paths because they cannot differentiate the direction or depth of long, buried continuous pipes. For insulated electrical cables or plastic pipes, metal detectors are completely ineffective as there is no AC current to generate a magnetic field. Furthermore, the detection depth of standard consumer metal detectors is typically limited to 1 - 2 meters for small objects, whereas underground utility lines are often buried 3 - 5 meters deep or even more.

Air bubbles that form during stirring not only affect mixing efficiency but can also skew analytical results in some laboratory applications. Learn about the causes and effective ways to minimize them

If the magnetic stir bar rotates weakly, easily swings away, or no longer creates the same swirling motion as before, has it lost its magnetism? Find out the causes, how to check, and the appropriate solutions.

Two metal detectors may have fairly similar specifications, but their field results can differ significantly. Some devices operate stably on park ground, while others exhibit significant interference when moved to red basalt soil or coastal areas

Even with the same device and the same object, the detection results are not always the same. In some areas, the signal is clearly visible from a considerable distance, while in other areas, the probe must be brought close to the ground to receive a response.