EMIN Vietnam Joint Stock Company would like to express our sincere thanks for precious interest and enthusiastic support & cooperation of all valued Clients and Partners over the years. In order to meet development goals and expand a professional working environment more effectively, EMIN are proud to announce the change of office locations in Hanoi, Danang city, and HCM city

OFFICIAL ANNOUNCEMENT: CHANGE OF OFFICE LOCATION

ANNOUNCEMENT

(Rev: Change of head office and branches location)

Hanoi, November 29, 2021

Dear valued Clients and Partners,

Taking this opportunity, EMIN Vietnam Joint Stock Company would like to express our sincere thanks for precious interest and enthusiastic support & cooperation of all valued Clients and Partners over the years. In order to meet development goals and expand a professional working environment more effectively, EMIN are proud to announce the change of office locations in Hanoi, Danang city, and Ho Chi Minh city:

As of November 29, 2021, the old offices at:

- Hanoi: No 8A, Hoang Cau Street, Trung Liet Ward, Dong Da District, Ha Noi, Vietnam

- Danang city branch: No 147/7 Nguyen Tri Phuong Street, Vinh Trung Ward, Thanh Khe District, Da Nang City, Vietnam

- Ho Chi Minh city branch: No 218 Cong Hoa Street, Ward 12, Tan Binh District, Ho Chi Minh City, Vietnam

Will be officially changed to the new address as follows:

Head office in Hanoi: No 203 Nguyen Ngoc Vu, Trung Hoa Ward, Cau Giay District, Ha Noi City, Vietnam

Danang city branch: No 467, Đien Bien Phu Str, Hoa Khe Ward, Thanh Khe District, Da Nang City, Vietnam

Ho Chi Minh city branch: 110A Chu Van An, Ward 26, Binh Thanh District, Ho Chi Minh City, Vietnam

Kindly update your contact information and send all correspondence to this address as of November 29, 2021.

We look forward to the long-term cooperation of all valued Clients and Partners.

Yours sincerely,

General Director

Nguyen Thanh Hai

관련 뉴스

2026년 08월 05일 15시 30분 41초

Can an analog multimeter still measure capacitors?

An analog multimeter can still be used to quickly check if a capacitor is shorted, open-circuited, or capable of charging and discharging. However, if precise capacitance measurement or an assessment of capacitor quality is required, a digital multimeter or LCR meter will yield more reliable results

2026년 08월 05일 11시 19분 27초

Detect Motor Slip or Deceleration After Just a Few Minutes of RPM Measurement

By simply measuring the rotational speed (RPM) and comparing it against design specifications or historical maintenance data, engineers can detect signs of belt slippage, speed reduction, or power loss without needing to disassemble the motor

2026년 08월 04일 14시 45분 15초

Measuring Pump Shaft Speed? When Is It Necessary, and How Should It Be Done Correctly?

Measuring pump shaft speed helps determine the equipment's actual rotational speed (RPM), allowing for comparison against design specifications to detect issues such as belt slippage, incorrect gear ratios, abnormal motor operation, or failure to achieve the desired flow rate. Depending on operating conditions, engineers may choose a laser tachometer, a contact tachometer, or a stroboscope

2026년 08월 04일 10시 12분 55초

Does Measuring RPM Help Calculate Conveyor Belt Speed (m/min)?

RPM measurements can certainly be used to calculate conveyor belt speed (m/min) if the drum diameter is known. Learn about the calculation formula, practical examples, and how to take accurate measurements using a tachometer

2026년 08월 03일 11시 24분 20초

PONOVO Conducts Product Training at EMIN Vietnam

To share knowledge about testing equipment and testing solutions in the electrical and energy sector, Ponovo organized a training and product presentation session at the EMIN office on July 9, 2026.