M5-S1-MV Basic Method 5 Sampling System, 220V,
Metric, with the following:
(1) C-5100-X Console with Open Frame Pump with dry gas
meter
(1) M5-SC6 Modular Sample Case
(1) PRA-S5 Heated Stainless Steel Lined Probe Assembly, 5'
Effective Length
(2) PRL-P5 Pyrex Probe Liner, 5' Effective, #28 Ball W ORing
(1) UC-25 Umbilical Cable, 25'
(1) M5-UA Umbilical Adapter
(1) PRNS-S Stainless Steel Nozzle Set Of 7 Sizes, 1/8"-1/2"
(1) GSBO-3 Single Glassware Set, Precision Ground Ball
Joint, O-Ring
(1) GF3-107 Glass Fiber Filters, Box Of 100
(1) M5-CK7 Probe Brush
(4) M5-CK5 Probe Brush Extension Rod, 18"
(1) M5-PC-TI83 Pre-Programmed TI-83 Calculator,
Isokinetics, Immediate Display and Updates
(2) M5-SRS-5 Suspension Rail System
(1) Calibration: CO-QC8-B-Set Critical Orifice Set of 5
Calibrated orifices with ½” QC stem, brass, calibration
report, spreadsheet diskette, in foam-lined case

Download datasheet

Datasheet System

STACK SAMPLING EQUIPMENT SPECIFICATIONS

ISOKINETIC STACK SAMPLING SYSTEM:

Isokinetic Source Sampling Console with Open Frame Pump

• Calibrated Direct Reading Metric Unit Digital Dry Gas Meter
• Y = 1.0 ± 0.05 (Variation less than 2%); ΔH@ = 46.736 ± 3.81 (Variation less than 5.08)
• Dual Inclined Manometer, 254mm Vertical Scale, 25.4mm Incline, 0.1mm Incline
• Resolution, Positive Brass Shutoff Valves for Transport
• Individual Solid State Temperature Controllers for Probe and Filter Oven Circuits
• LED Centigrade/Fahrenheit Temperature Readout with 7-Station Selector Switch
• Auxiliary Thermocouple Jack for Handheld Temperature Readout
• Power, Pump, Timer, Null Solenoids and Orsat Pump Switch Controls
• Individually Fused Circuitry Located on Easily Accessible Panel
• Resettable Elapsed Digital Timer Readable to 0.01
• Coarse and Fine Flow Control Valves
• ½” Sample Line, 3/8” Pitot Line and ¼” Orsat Line Quick Connect Fittings
• 0-30”Hg Vacuum Gauge
• Modular Electrical and Plumbing Panels and Removable Front and Rear Access Doors
• Lightweight 090” Aluminum Housing, Stainless Steel Latches, Handle and Hardware
• 110V/60Hz or 220VAC/50/60Hz Power Supply, 4-pin Amphenol Military Style Power Supply Connector
• Leak Free External Fiber Vane Vacuum Pump in Open Frame Housing,
• 88LPM @ 1”Hg, 57 LPM @ 15”Hg, 26”Hg Maximum Vacuum

Modular Sample Case with Heated Filter Box and Insulated Impinger Box

• Aluminum Housing with Stainless Steel Latches and Hardware Holds 3” or 4” Nominal
• Filter Assemblies
• Removable Stainless Steel Probe Support Clamp
• Type K Thermocouple Jack
• Modular Electrical & Heater Panel, 700 Watt Heater, 110V/60Hz or 220V/50Hz
• Removable Aluminum Faced ½” Fiberglass Insulation Panels
• Stainless Steel Slide and Locking Hardware for 3 Sizes of Cold Box
• (4-6, 6-8, or 8-12 Impinger Sizes)

Umbilical Cable

• Flexible Construction with Abrasion Resistant Low Friction Overbraid
• One High Vacuum Sample Line (300 psi) with ½” Quick Connect Couplings, Three Kink
• Resistant Vinyl Pressure Lines with Quick Connect Couplings, Five Thermocouple
• Lines, One Five-Conductor Power Cable with 4-Pin Military Style Amphenol
• Connectors, Full Length Nylon Strain Relief Cable

Isokinetic Sampling Probe

• Corrosion Resistant Stainless Steel, Welded Construction
• Available in High Temperature Inconel Alloy 600
• Orsat Line with ¼” QC, Pitot Lines with 3/8” QCs and Removable Pitot Tip, Stack and Probe Type K Thermocouples, Removable 110VAC or 220VAC Heating Mantle, Removable Liners Available in Pyrex, Stainless Steel, Quartz and Inconel Alloy 600

Isokinetic Sampling Nozzle Sets

• 7 Sizes from 1/8” (3.175mm) to 1/2” (12.7mm) in Foam-Lined Case
• Available in Pyrex, Stainless Steel, Quartz and Inconel Alloy 600

Glassware

• Available Heavy Wall Borosilicate Glass with Precision Ground #28 Ball with O-Ring and Socket Connections, Leak-Free Performance With or Without O-Rings
• Standard 82.6mm Filter Assemblies with PTFE Filter Support Frit and Rapid Assembly/Release Clamp Ring Assembly, Eliminates Need for Filter Tripod