FLIR A50 소형 열화상 스트리밍 카메라 (-20°C~1000°C)

Image & Optical Data: Standard Configuration

IR resolution: 464 × 348

Visual Resolution: 1280 × 960 pixels (optional)

Thermal Resolution: 29°: <35 mK, 51°: <35 mK, 95°: <45 mK

Focus: Fixed, adjustable with included focus tool

Spatial Resolution (IFOV): 29°: 1.2 mrad/pixel, 51°: 2.1 mrad/pixel, 95°: 4.0 mrad/pixel

FOV Options: 29°, 51°, 95°

Detector Pitch: 17 µm

Spectral Range: 7.5–14.0 µm

Frame Rate: 30 Hz

Object temperature range: -20°C to 175°C (-4°F to 347°F), 175°C to 1000°C (347°F to 1832°F)

Accuracy: ±2°C (±3.6°F) or ±2% of reading, for ambient temperature 15°C to 35°C (59°F to 95°F) and object temperature above 0°C (32°F)

Video Streaming, RTSP Protocol: Standard Configuration

Unicast: Yes

Multicast: Yes

Multiple Image Streams: Yes, visual camera option needed (P/N T300295)

Streaming Resolution: 640 × 480 pixels

Source: Visual / IR / MSX® / FSX® (visual camera is optional)

Contrast Enhancement: FSX® / Histogram equalization (IR only)

Overlay: With/Without

Encoding: H.264, MPEG4, or MJPEG

Video Stream 1

Streaming Resolution: 1280 × 960 pixels

Source Visual: (visual camera is optional)

Overlay: No

Encoding: H.264, MPEG4, or MJPEG

Unicast: Yes

Multicast: Yes

Dual Video Streams: No (either IR, Visual, MSX, FSX or Radiometric 16 bit)

Visual Resolution: 640 × 480

Pixel Formats: YUV411, MONO8, MONO16

Radiometric Resolution: 464 × 348

Temperature Linear 16-bit: Yes

Compressed JPEG-LS: No

Ethernet Communication: GigE Vision, GenICam (SFNC 2.4)

Connector Types: M12 8-pin X-coded, female; RP-SMA, female

Ethernet Interface: Wired, Wi-Fi (optional)

Ethernet Power: Power over Ethernet, PoE IEEE 802.3af class 3

Ethernet Protocols: IEEE 1588, SNMP, TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, sftp (server), FTP (client), SMTP, DHCP, MDNS (Bonjour), uPnP

Ethernet Standard: IEEE 802.3

Ethernet Type: 1000 Mbps

Digital Input/Output

Connector Type: M12 Male 12-pin A-coded (shared with external power)

Digital Input: 2× opto-isolated, Vin (low) = 0 to 1.5 V, Vin (high) = 3 to 25 V

Digital Output: 3× opto-isolated, 0 to 48 V DC, max. 350 mA (derated to 200 mA at 60°C). Solid-state opto relay, 1× dedicated as fault output (NC)

Power

Power Consumption: 7.5 W at 24 V DC typical, 7.8 W at 48 V DC typical, 8.1 W at 48 V PoE typical

External Power Operation: 24/48 V DC 8 W max

External Voltage: Allowed range 18 V to 56 V DC

Power Connection: M12 12-pin A-coded, male (shared with Digital I/O)

Wi-Fi

Connector Type: Female RP-SMA

Datasheet