빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Measurement & Analysis
CP Error (E state) Simulation: Pass/Fault (CP signal short-circuited to PE)
CP State Simulation: A (Disconnected), B (Connected), C (Charging), D (Charging w/ ventilation), E (Error)
Input Type
Measuring Terminals: L1, L2, L3, N, PE Output for test purposes only: Max. 250 V
(Single Phase) / 430 V (3 phase), 50 / 60 Hz, CAT II 300 V, Max. 10 A
PE Error Simulation: Pass/Fault (Interruption of PE conductor)
PE Pre-Test: Pass/Fault (>50 V AC/DC between PE conductor and touch sensor)
PP State Simulation: Open, 13 A, 20 A, 32 A, 63 A
RCD/CCID Trip Test: Pass/Fault (Test RCD/CCID activation once tripped)
Voltage Phase Indication: L1, L2, L3
Communication & Data Storage
Connector: Types T2 (Built-in), Type 1 (converter included)
Output
(Optional) DM286: CP State C/D for AC Voltage with Hz measurement
(Optional) IM75-2: CP State B for EV cable Insulation Test
Power
Battery life: Approx. 100 hours, with alkaline batteries
Battery type: 4 × AA Alkaline batteries
General
Box Contents
EV45-T2
Converter for Type 1
Carrying Pouch
Test Leads
4 × AA Batteries
User Manual
Size (L x W x H): 237 mm × 65 mm × 56 mm(9.33 in × 2.56 in × 2.20 in)
Environmental & Certifications
Certifications: ETL, CE, RCM
EMC: EN61326-1
Operating Altitude: 2000 m (6560 ft)
Operating Ambient Temperature and Relative Humidity (RH):
−10°C to 30°C (14°F to 86°F), <85% RH
30°C to 40°C (86°F to 104°F), <75% RH
40°C to 50°C (104°F to 122°F), <45% RH
Safety Category: CAT II-300 V, IEC 61010-1
Storage temperature and relative humidity [RH]: −20°C to 60°C (−4°F to 140°F), 0 to 80% RH (without batteries)
