FUZRR FR100R Rogowski Coil Current Sensor (0 A ~ 10 kA, φ100mm, 315mm)

Coil length: 315mm

Coil inner diameter: φ100mm

Features: Detection of AC leakage current, large current, high harmonic current, complex waveformcurrent, transient impulse current, phase, electrical energy, power, power factor, etc.

Detection method: Flexible CT: The output signal is the differential of the current to time. By integratingtheoutput voltage signal, the input current can be truly restored

Coil Diameter: φ 8 mm

Range: 0 A ~ 10 kA

Output: 100mV/1kA (the optional integrator can be customized to output other parameters)

Resolution: 0.1A

Accuracy class: ±1.0%FS (50Hz/60Hz); 23℃±2℃, below 70%RH, the wire is in the center of the coil)

Phase error: ≤1°(50Hz/60Hz; 23℃±2℃)

Initial phase: 90° Output Interface BNC connector (optional audio plug, banana plug, bare wire)

Output cable length: 2m

Electric field disturbance: No hysteresis effect, no external electric field interference

Wire position: The tested lead is in the center of the coil, and the influence of position error is ≤±0.3%FS

Response frequency: 0.1Hz～10MHz

Line voltage: Line test below AC 1000V

Working temperature and humidity: -20℃～50℃; below 80%rh

Storage temperature and humidity: -10℃～60℃; below 70%rh

Dielectric strength: AC 2000V/rms (both ends of the coil)

Suitable for safety regulations: IEC1010-1, IEC1010-2-032, Pollution Degree 2, CAT IV 1000V

Datasheet