빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Electrical Specification
V: 100kV, 50kV, 35kV, 20kV
I: 1mA, 4mA, 6mA, 10mA
W: 100W, 200W, 210W, 200W
Line Regulation: Not more than 50ppm of maximum rated output voltage for ± 10% input line change
Load Regulation: Not more than 100ppm of maximum rated output voltage for 0 to maximum output current change.
Ripple: Not more than 20V (peak to peak) - 100W Version
Temperature Coefficient:
(0 to 50°C) Not more than 50ppm of maximum output per °C
Stability After ½ Hour Warm Up:
Not more than 0.01% per hour
Not more than 0.02% per 8 hours.
Size: 19 inch wide suitable for standard rack mounting, 6U high
Weight:
Main Unit: 35kg
Alternative Polarity Head: 12kg
High voltage connector and cable: Pre-assembled mating high voltage connector with 3 metres of high voltage shielded cable will be provided as standard.
Power input connector: A 2m 3-wire mains lead plug will be provided as standard.
Cooling: Forced air by means of a fan.
IEEE-488 interface: Full talker/listener capability is available through the IEEE-488 interface.
The interface functions allow output voltage and current limit to be programmed via the IEEE-488 bus. In addition, voltage and current measurements can be taken on request.
Power requirements: 230V AC ± 10%, less than 2A, 50Hz.
Temperature: Operating: 15°C to 35°C.
Storage: 0°C to 50°C.
Relative humidity: Operating: 30% to 80%.
Storage: < 95%.
